Combined use of straddle packer testing and FLUTe profiling for hydraulic testing in fractured rock boreholes

摘要

A combination of high resolution hydraulic tests using straddle packers and transmissivity (T) profiling using the FLUTe flexible liner method (liner profiling) in densely fractured rock boreholes is shown to be efficient for the determination of the vertical distribution of T along the entire hole. The liner T profiling method takes a few hours or less to scan the entire borehole length resulting in a T profile. Under favorable conditions this method has good reliability for identifying the highest T zones identified by distinct decreases in liner velocity when these zones are covered by the descending liner. In contrast, for one short test interval (e.g., 1-2 m) the multiple-test, straddle-packer method takes a few hours to measure T with good precision and accuracy using a combination of steady-state and transient tests (e.g., constant head step tests, slug tests, and constant rate pumping tests). Because of the time consuming aspect of this multiple-test method, it is most efficient in each borehole to conduct straddle packer testing only in priority zones selected after assessment of other borehole data collected prior to packer testing. The T profile from the liner method is instrumental in selecting high permeable zones for application of the multiple-test method using straddle packers, which in turn, refines the T estimation from the liner profile. Results from three boreholes in densely fractured sandstone demonstrate this approach showing the synergistic use of the methods with emphasis on information important for determining hydraulic apertures. (C) 2015 Elsevier B.V. All rights reserved.