...
首页> 外文期刊>Journal of environmental & engineering geophysics >A new quantitative procedure to determine the location and embedment depth of a void using surface waves
【24h】

A new quantitative procedure to determine the location and embedment depth of a void using surface waves

机译:一种新的定量程序,可使用表面波确定空隙的位置和嵌入深度

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Detecting underground cavities beneath construction sites and urban areas is a crucial task for many engineering projects. Each year, subsidence and surface soil failure due to underground voids cause substantial damage around the world. Most of the seismic methods currently used for cavity detection can successfully locate a void but not its embedment depth. In spite of successful case histories, void detection is still a challenging problem because of the lack of a standard, quantitative void-detection technique. In addition, existing non-destructive techniques do not consider the effect of lateral inhomogeneities, i.e., cavities, in the wave propagation. Thus, the detection of underground cavities needs further study.This paper presents the results of numerical simulations of the multi-channel analysis of surface waves (MASW) in a laterally non-homogeneous medium. First, the Lamb solution is used to calibrate a homogeneous model, subsequently, voids with different dimensions and embedment depths are included in the medium. Analysis of the resulting surface responses shows that time and frequency domain parameters are sensitive to the location, embedment depth, and size of voids; which interact with the incoming wave front causing reflection of Rayleigh waves and strong attenuation of transmitted waves. The power-spectral-density functions clearly show patterns of attenuation and amplification. The authors propose a new analysis procedure to determine not only the location but also embedment depth of a void; this procedure is based on the attenuation analysis of Rayleigh waves (AARW). The new method uses the frequency spectra of recorded signals to compute a spectral-energy parameter and a modified logarithmic-decrement parameter. Numerical results of the AARW method applied to different conditions, including noisy signals, show that these parameters indicate successfully the location and embedment depth of underground voids.
机译:对于许多工程项目而言,检测建筑工地和市区下方的地下洞室是一项至关重要的任务。每年,由于地下空隙而导致的沉降和表层土壤破坏在世界范围内造成重大破坏。当前用于腔检测的大多数地震方法都可以成功地定位空洞,但不能成功地定位其嵌入深度。尽管有成功的案例历史,但由于缺乏标准的定量空洞检测技术,空洞检测仍然是一个具有挑战性的问题。另外,现有的非破坏性技术没有考虑横向不均匀性即空穴在波传播中的影响。因此,地下空腔的探测尚需进一步研究。本文介绍了横向非均匀介质中表面波多通道分析的数值模拟结果。首先,使用Lamb解决方案来校准均质模型,随后,在介质中包含具有不同尺寸和嵌入深度的空隙。对产生的表面响应的分析表明,时域和频域参数对位置,嵌入深度和空隙尺寸敏感。它们与入射波前相互作用,引起瑞利波的反射和透射波的强烈衰减。功率谱密度函数清楚地显示了衰减和放大的模式。作者提出了一种新的分析程序,不仅可以确定空隙的位置,而且可以确定空隙的嵌入深度。此过程基于瑞利波(AARW)的衰减分析。新方法使用记录信号的频谱来计算频谱能量参数和修改后的对数减量参数。 AARW方法应用于包括噪声信号在内的不同条件的数值结果表明,这些参数成功地表明了地下孔隙的位置和埋深。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号