首页> 外文期刊>Journal of Fluid Mechanics >FINGERING INSTABILITIES IN VERTICAL MISCIBLE DISPLACEMENT FLOWS IN POROUS MEDIA
【24h】

FINGERING INSTABILITIES IN VERTICAL MISCIBLE DISPLACEMENT FLOWS IN POROUS MEDIA

机译:多孔介质中垂直迁移位移中的不稳定性寻找

获取原文
获取原文并翻译 | 示例
           

摘要

The fingering instabilities in vertical miscible displacement flows in porous media driven by both viscosity and density contrasts are studied using linear stability analysis and direct numerical simulations. The conditions under which vertical flows are different from horizontal flows are derived. A linear stability analysis of a sharp interface gives an expression for the critical Velocity that determines the stability of the flow. It is shown that the critical velocity does not remain constant but changes as the two fluids disperse into each other. In a diffused profile, the flow can develop a potentially stable region followed downstream by a potentially unstable region or vice versa depending on the flow velocity, viscosity and density profiles, leading to the potential for 'reverse' fingering. As the flow evolves into the nonlinear regime, the strength and location of the stable region changes, which adds to the complexity and richness of finger propagation. The flow is numerically simulated using a Hartley-transform-based spectral method to study the nonlinear evolution of the instabilities. The simulations are validated by comparing to experiments. Miscible displacements with linear density and exponential viscosity dependencies on concentration are simulated to study the effects of stable zones on finger propagation. The growth rates of the mixing zone are parametrically obtained for various injection velocities and viscosity ratios. [References: 31]
机译:使用线性稳定性分析和直接数值模拟研究了在多孔介质中由粘度和密度对比驱动的垂直混相驱替流动中的指法不稳定性。得出垂直流与水平流不同的条件。尖锐界面的线性稳定性分析给出了确定流速稳定性的临界速度表达式。结果表明,临界速度不是恒定不变的,而是随着两种流体相互分散而变化的。在扩散剖面中,取决于流速,粘度和密度剖面,流可能会形成潜在的稳定区域,然后是下游的潜在不稳定区域,反之亦然,从而导致“反向”指弹的可能性。随着流动演变成非线性状态,稳定区域的强度和位置会发生变化,这会增加手指传播的复杂性和丰富性。使用基于Hartley变换的谱方法对流动进行数值模拟,以研究不稳定性的非线性演化。通过与实验进行比较来验证仿真。模拟了线性密度和指数粘度与浓度相关的可混溶位移,以研究稳定区对手指传播的影响。对于各种注射速度和粘度比,参数化地获得混合区的生长速率。 [参考:31]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号