The effect of small-amplitude convective disturbances on the size and bursting of a laminar separation bubble

摘要

Short laminar separation bubbles can develop on a flat plate due to an externally imposed pressure gradient. Here, these bubbles are computed by means of direct numerical simulations. Laminar-turbulent transition occurs in the bubble, triggered by small disturbance input with fixed frequency, but varying amplitude, to keep the bubbles short. The forcing amplitudes span a range of two orders of magnitude. All resulting bubbles differ with respect to their mean flow, linear-stability characteristics and distance between transition and mean reattachment locations. Mechanisms responsible for these differences are analysed in detail. Switching off the disturbance input or reducing it below a certain, very small threshold causes the short bubble to grow continuously. Eventually, it no longer exhibits typical characteristics of a short laminar separation bubble. Instead, it is argued that bursting has occurred and the bubble displays characteristics of a long-bubble state, even though this state was not a statistically steady state. This hypothesis is backed by a comparison of numerical results with measurements. For long bubbles, the transition to turbulence is not able to reattach the flow immediately. This effect can lead to the bursting of a short bubble, which remains short only when sufficiently large disturbances are convected into the bubble. Large-scale spanwise-oriented vortices at transition are observed for short but not for long bubbles. The failure of the transition process to reattach the flow in the long-bubble case is ascribed to this difference in transitional vortical structures.