Oil and grease measurement in highway runoff - Sampling time and event mean concentrations

摘要

An event mean concentration (EMC), usually collected with an automatic, flow-weighted composite sampler, is often used to characterize stormwater Pollutants. Automatic samplers are not recommended for collecting oil and grease (O&G) samples due to possible biases associated with interactions with tubing and pumps. To measure the EMC without sampler interferences, a series of grab samples (often over ten samples) must be collected along with the flow measurement to compute the EMC. This paper examines 22 O&G pollutographs from small, impervious highway sites, to determine when a single O&G grab sample most closely approximates a flow-weighted composite sample. Samples collected within the first hour of a storm event overestimated the O&G EMC by 20 mg/L or more, while samples collected toward the end of the event underestimated the EMC. The best time to collect a single grab sample ranged from 1 to 6 h after the beginning of runoff, and was related to site or storm-specific factors. Results obtained from this study also showed that strong correlations (R-2 = 0.9) exist between O&G and other organic constituents, such as chemical oxygen demand (COD) and dissolved organic carbon (DOC). Correlations also exist between O&G EMC, antecedent dry days, and total rainfall. Depending upon site and regulatory specific factors, using COD or DOC EMCs in lieu O&G samples may be a better strategy.