...
首页> 外文期刊>Journal of clinical densitometry >Use of Relative vs Fixed Offset Distance to Define Region of Interest at the Distal Radius and Tibia in High-Resolution Peripheral Quantitative Computed Tomography
【24h】

Use of Relative vs Fixed Offset Distance to Define Region of Interest at the Distal Radius and Tibia in High-Resolution Peripheral Quantitative Computed Tomography

机译:在高分辨率外围定量计算机断层扫描中使用相对偏移量与固定偏移量来定义远端半径和胫骨处的感兴趣区域

获取原文
获取原文并翻译 | 示例
           

摘要

Although the region of interest in high-resolution peripheral quantitative computed tomography, defined based on the manufacturer's protocol for in vivo scanning, provides consistency and is practically convenient, it does not take into account possible variation in morphology in the regions adjacent to the measurement site. This study aimed at compare the morphologic variation in measurements using the standard fixed offset distance to define the distal starting slice against those obtained by using a relative measurement position scaled to the individual bone length at the distal radius and tibia in normal healthy adult subjects. A total of 40 healthy adult subjects (median height, 175.3 cm; range: 150.0-196.0 cm) were included in the study. High-resolution peripheral quantitative computed tomography at the distal radius and tibia was performed in all subjects, the region of interest defined by, first, the standard measurement protocol, where the most distal CT slice was 9.5 mm and 22.5 mm from the end plate of the radius and tibia, respectively, and second, the relative measurement method, where the most distal CT slice was at 4% and 7% of the radial and tibial lengths, respectively. Volumetric densities and microarchitectural parameters were compared between the 2 methods. Measurements of the total and cortical volumetric density and cortical thickness at the radius and tibia and cortical porosity, trabecular volumetric density, and trabecular number at the tibia were significantly different between the 2 methods (all p < 0.001). The predicted morphologic variation with varying measurement position was substantial at both the radius (up to 34%) and the tibia (up to 36%). A lack of consideration to height (and in turn the bone lengths) in the standard patient protocol could lead to the introduction of systematic errors in radial and tibial measurements. Although this may not be of particular significance in longitudinal studies in the same individual, it potentially assumes critical importance in cross-sectional studies.
机译:尽管基于制造商的体内扫描协议定义的高分辨率外围定量计算机断层扫描中的感兴趣区域提供了一致性,并且实际上很方便,但并未考虑邻近测量部位的区域中可能出现的形态变化。这项研究旨在比较在正常健康成人受试者中使用标准固定偏移距离定义远端起始切片的测量中的形态变化与通过使用相对测量位置缩放至远端半径和胫骨的单个骨长的相对测量位置所获得的结果。研究共纳入40名健康成人受试者(中位身高175.3 cm;范围:150.0-196.0 cm)。在所有受试者中均进行了远端骨和胫骨的高分辨率外周定量计算机断层扫描,首先通过标准测量方案定义了感兴趣的区域,其中最远端的CT切片位于距患者端板9.5 mm和22.5 mm处。分别是the骨和胫骨,其次是相对测量方法,其中最远端的CT切片分别占the骨和胫骨长度的4%和7%。比较了两种方法的体积密度和微结构参数。两种方法在the骨和胫骨处的总和皮质体积密度和皮质厚度的测量值以及在胫骨处的皮质孔隙率,骨小梁体积密度和骨小梁数目的测量值均存在显着差异(所有p <0.001)。在半径(最大34%)和胫骨(最大36%)处,随着测量位置的变化,预测的形态学变化都很大。在标准的患者规程中,如果不考虑身高(以及骨长),可能会导致在radial骨和胫骨测量中引入系统误差。尽管这在同一个人的纵向研究中可能没有特别重要的意义,但它可能在横截面研究中具有至关重要的意义。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号