首页> 外文期刊>Journal of Catalysis >CO oxidation over Au/TiO_2 catalyst: Pretreatment effects, catalyst deactivation, and carbonates production
【24h】

CO oxidation over Au/TiO_2 catalyst: Pretreatment effects, catalyst deactivation, and carbonates production

机译:Au / TiO_2催化剂上的CO氧化:预处理效果,催化剂失活和碳酸盐生产

获取原文
获取原文并翻译 | 示例
           

摘要

A commercially available Au/TiO_2 catalyst was subjected to a variety of thermal treatments in order to understand how variations in catalyst pretreatment procedures might affect CO oxidation catalysis. Catalytic activity was found to be inversely correlated to the temperature of the pretreatment. Infrared spectroscopy of adsorbed CO experiments, followed by a Temkin analysis of the data, indicated that the thermal treatments caused essentially no changes to the electronics of the Au particles; this, and a series of catalysis control experiments, and previous transmission electron microscopy (TEM) studies ruled out particle growth as a contributing factor to the activity loss. Fourier transform infrared (FTIR) spectroscopy showed that pretreating the catalyst results in water desorption from the surface, but the observable water loss was similar for all the treatments and could not be correlated with catalytic activity. A Michaelis-Menten kinetic treatment indicated that the main reason for deactivation is a loss in the number of active sites with little changes in their intrinsic activity. In situ FTIR experiments during CO oxidation showed extensive buildup of carbonate-like surface species when the pretreated catalysts were contacted with the feed gas. A semi-quantitative infrared spectroscopy method was developed for comparing the amount of carbonates present on each catalyst; results from these experiments showed a strong correlation between the steady-state catalytic activity and amount of surface carbonates generated during the initial moments of catalysis. Further, this experimental protocol was used to show that the carbonates reside on the titania support rather than on the Au, as there was no evidence that they poison Au-CO binding sites. The role of the carbonates in the reaction scheme, their potential role in catalyst deactivation, and the role of surface hydroxyls and water are discussed.
机译:为了理解市售的Au / TiO_2催化剂,进行了各种热处理,以了解催化剂预处理程序中的变化如何影响CO氧化催化。发现催化活性与预处理温度成反比。吸附的CO实验的红外光谱,然后对数据进行Temkin分析,表明热处理基本上不会改变Au粒子的电子。为此,以及一系列的催化控制实验以及先前的透射电子显微镜(TEM)研究排除了颗粒生长是造成活性损失的因素。傅里叶变换红外(FTIR)光谱表明,对催化剂进行预处理会导致水从表面解吸,但是在所有处理过程中,可观察到的失水量均相似,并且与催化活性无关。 Michaelis-Menten动力学处理表明,失活的主要原因是活性位点数量减少,其固有活性几乎没有变化。在CO氧化过程中的原位FTIR实验表明,当预处理的催化剂与进料气接触时,碳酸盐样表面物质会大量堆积。为了比较每种催化剂上存在的碳酸盐的量,开发了一种半定量红外光谱法。这些实验的结果表明,稳态催化活性与在催化初始时刻产生的表面碳酸盐量之间存在很强的相关性。此外,该实验方案用于表明碳酸盐驻留在二氧化钛载体上而不是Au上,因为没有证据表明它们会毒化Au-CO结合位点。讨论了碳酸盐在反应方案中的作用,它们在催化剂失活中的潜在作用以及表面羟基和水的作用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号