...
首页> 外文期刊>Journal of Biomechanics >Particle deposition in a realistic geometry of the human conducting, airways: Effects of inlet velocity profile, inhalation flowrate and electrostatic charge
【24h】

Particle deposition in a realistic geometry of the human conducting, airways: Effects of inlet velocity profile, inhalation flowrate and electrostatic charge

机译:逼真的人体呼吸道几何形状中的颗粒沉积:入口速度曲线,吸入流量和静电荷的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Understanding the multitude of factors that control pulmonary deposition is important in assessing the therapeutic or toxic effects of inhaled particles. The use of increasingly sophisticated in silico models has improved our overall understanding, but model realism remains elusive. In this work, we use Large Eddy Simulations (LES) to investigate the deposition of inhaled aerosol particles with diameters of d(p) = 0.1, 0.5,1, 2.5, 5 and 10 mu m (particle density of 1200 kg/m(3)). We use a reconstructed geometry of the human airways obtained via computed tomography and assess the effects of inlet flow conditions, particle size, electrostatic charge, and flowrate. While most computer simulations assume a uniform velocity at the mouth inlet, we found that using a more realistic inlet profile based on Laser Doppler Anemometry measurements resulted in enhanced deposition, mostly on the tongue. Nevertheless, flow field differences due to the inlet conditions are largely smoothed out just a short distance downstream of the mouth inlet as a result of the complex geometry. Increasing the inhalation flowrate from sedentary to activity conditions left the mean flowfleld structures largely unaffected. Nevertheless, at the higher flowrates turbulent intensities persisted further downstream in the main bronchi. For d(p) > 2.5 mu m, the overall Deposition Fractions (DF) increased with flowrate due to greater inertial impaction in the oropharynx. Below d(p) = 1.0 mu m the DF was largely independent of particle size; it also increased with flowrate, but remained significantly lower. Electrostatic charge increased the overall DF of smaller particles by as much as sevenfold, with most of the increase located in the mouth-throat. Moreover, significant enhancement in deposition was found in the left and right lung sub-regions of our reconstructed geometry. Although there was a relatively small impact of inhalation flowrate on the deposition of charged particles for sizes d(p) < 2.5 mu m, impaction prevailed over electrostatic deposition for larger particles as the flowrate was increased. Overall, we report a significant interplay between particle size, electrostatic charge, and flowrate. Our results suggest that in silico models should be customized for specific applications, ensuring all relevant physical effects are accounted for in a self-consistent fashion. (C) 2015 The Authors. Published by Elsevier Ltd.
机译:了解许多控制肺部沉积的因素对于评估吸入颗粒的治疗或毒性作用非常重要。使用日益复杂的计算机模型已经改善了我们的整体理解,但是模型的现实性仍然难以捉摸。在这项工作中,我们使用大涡模拟(LES)研究了直径为d(p)= 0.1、0.5、1、2.5、5和10μm(颗粒密度为1200 kg / m( 3))。我们使用通过计算机断层扫描获得的人类呼吸道的重构几何形状,并评估进气流量条件,粒径,静电荷和流速的影响。尽管大多数计算机模拟都假设在口腔入口处的速度均匀,但我们发现,基于激光多普勒风速仪测量结果使用更逼真的入口轮廓会增强沉积,主要是在舌头上。尽管如此,由于复杂的几何形状,由于入口条件而引起的流场差异仅在入口下游的一小段距离内就被大大消除了。从久坐状态到活动状态增加吸入流速,使平均流场结构基本不受影响。然而,在较高的流速下,湍流强度仍在主支气管的下游继续存在。对于d(p)> 2.5μm,由于口咽中较大的惯性撞击,总沉积分数(DF)随着流量增加。低于d(p)= 1.0微米,DF在很大程度上与粒径无关;它也随着流量的增加而增加,但仍显着降低。静电电荷将较小颗粒的总DF增加了多达7倍,其中大部分增加是在口咽处。此外,在我们重建的几何结构的左和右肺亚区域发现了沉积的显着增强。尽管吸入流量对尺寸d(p)<2.5μm的带电粒子的沉积影响相对较小,但随着流量的增加,较大颗粒的静电沉积比静电沉积占优势。总体而言,我们报告了粒径,静电荷和流速之间的显着相互作用。我们的结果表明,应针对特定应用定制计算机模型,以确保以自洽的方式考虑所有相关的物理效应。 (C)2015作者。由Elsevier Ltd.发布

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号