首页> 外文期刊>Digital Signal Processing >Additional correction to the impulse invariance method for the design of IIR digital filters
【24h】

Additional correction to the impulse invariance method for the design of IIR digital filters

机译:用于IIR数字滤波器设计的脉冲不变性方法的其他校正

获取原文
获取原文并翻译 | 示例
           

摘要

Almost four decades after the impulse invariance (i.i.) method has been in vogue, a correct way of its application has been emphasized independently, but at the same time, by Jackson and Mecklenbrauker. When there is a discontinuity at t = 0 in the analog impulse response, the correct way requires that one should take half of its value. In spite of this correction, due to under-sampling there persists aliasing error in the frequency domain. In this paper the effect of aliasing is viewed as a 3 dB frequency warping and a pre-warping step prior to its application is proposed to reduce it, thereby making the technique appropriate from the viewpoint of frequency domain also. Simulation examples comparing this approach with the traditional method reveal significant improvement in the frequency response. Further, according to Jackson and Mecklenbrauker and also as written in many a standard textbook available today, i.i. technique cannot be used when the degrees of the numerator and denominator polynomials of the parent analog transfer function are equal. An example under this category is the Pre-emphasis circuit or a simple high pass filter. We shall show how the technique can still be used even for a Pre-emphasis circuit. Antoniou proposed (an intelligently) modified impulse invariance technique for certain types of filters by which, aliasing error is nearly eliminated. These cases are neither admitted by the traditional i.i. method nor by that of Jackson and Mecklenbrauker at all. Antoniou's modified method results in a digital filter of order almost twice as great with an additional task of stabilization. The method in this paper retains the stability and order but gives satisfactory response. In the standard textbooks, the i.i. technique is explained with the help of a first-order low-pass filter and for higher orders, partial fraction expansion is used. For the situation of repeated poles, application of i.i. method calls for extreme care and special handling. This paper alternatively employs the use of state variables to make i.i. technique more elegant. (C) 2006 Elsevier Inc. All rights reserved.
机译:脉冲不变性(i.i.)方法流行了将近40年之后,杰克逊(Jackson)和梅克伦布劳克(Mecklenbrauker)分别强调了一种正确的应用方法。当模拟脉冲响应在t = 0处存在不连续性时,正确的方法要求其中一个取其值的一半。尽管进行了这种校正,但是由于欠采样,在频域中仍然存在混叠误差。在本文中,混叠的影响被视为3 dB频率弯曲,并提出了在其应用之前进行预弯曲的步骤以减小混叠,从而从频域的角度来看,使该技术也适用。仿真示例将该方法与传统方法进行了比较,显示出频率响应方面的显着改善。此外,根据杰克逊和梅克伦布鲁克的说法,以及许多当今编写的标准教科书所写的,即当父模拟传递函数的分子和分母多项式的次数相等时,不能使用该技术。此类别下的一个示例是预加重电路或简单的高通滤波器。我们将展示即使在预加重电路中仍可以使用该技术。 Antoniou对某些类型的滤波器提出了(一种智能的)改进的脉冲不变性技术,从而几乎消除了混叠误差。这些案例都不是传统的i.i.方法也不是杰克逊和梅克伦布鲁克的方法。 Antoniou的改进方法产生的数字滤波器的阶数几乎是其两倍,并带有稳定的附加任务。本文中的方法保留了稳定性和有序性,但给出了令人满意的响应。在标准教科书中,i.i。借助一阶低通滤波器来解释该技术,对于高阶,将使用部分分数扩展。对于反复出现极点的情况,请使用i.i.该方法要求特别注意和特殊处理。本文另选地使用状态变量来使i.i.技术更优雅。 (C)2006 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号