...
首页> 外文期刊>Drying technology: An International Journal >Crystallization and Drying of Milk Powder in a Multiple-Stage Fluidized Bed Dryer
【24h】

Crystallization and Drying of Milk Powder in a Multiple-Stage Fluidized Bed Dryer

机译:多级流化床干燥机中奶粉的结晶和干燥

获取原文
获取原文并翻译 | 示例

摘要

The rationale of this study has been to use fluidized beds to crystallize amorphous spray-dried skim milk powders with multiple stages of processing at different temperatures and humidities with the aim of rapidly making mostly crystalline powders. This paper discusses the performance of a multiple-stage fluidized bed dryer, and a combination of crystallization of lactose in spray drying at high humidity (lactose nuclei formation) and subsequent fluidized bed drying. Two different combinations of spray dryer and multi-stage fluidized-bed dryer have been suggested to crystallize lactose in skim milk powder. The results show significant improvements in the crystallinity of the powders. Moisture sorption test and X-ray diffraction analysis were used to assess the crystallinity of the powders. The processed powders that were crystallized in a humid-loop spray drying combined with a two-stage fluidized-bed dryer/crystallizer showed 92% improvement in lower amorphicity by processing at different stages of 70℃, 50% RH and 80℃, 50% RH for 15 minutes. The conventionally spray-dried powders that were crystallized in a three-stage fluidized-bed dryer/crystallizer showed 87% improvement in lower amorphicity (less moisture sorption) by processing at different stages of 60℃, 50% RH; 70℃, 40% RH; and 80℃, 40% RH for 20 minutes. The multiple-stage fluidized bed system showed distinctive potential to crystallize lactose significantly in skim milk powder using an industrial-feasible process.
机译:这项研究的基本原理是使用流化床使无定形喷雾干燥脱脂奶粉结晶,并在不同的温度和湿度下进行多步加工,目的是快速制造出大部分为结晶性的粉。本文讨论了多级流化床干燥机的性能,以及乳糖在高湿度下喷雾干燥(乳糖核形成)和随后流化床干燥的结晶过程。已经提出喷雾干燥器和多级流化床干燥器的两种不同组合来使脱脂奶粉中的乳糖结晶。结果表明粉末的结晶度显着改善。水分吸附测试和X射线衍射分析用于评估粉末的结晶度。在湿循环喷雾干燥中结合两级流化床干燥器/结晶器进行结晶的加工粉末,通过在70℃,50%RH和80℃,50%的不同阶段进行加工,降低了较低的非晶性,提高了92%。 RH 15分钟。在三级流化床干燥器/结晶器中结晶的常规喷雾干燥粉末,通过在60℃,50%RH的不同阶段进行处理,在较低的无定形性(较少的水分吸附)方面提高了87%。 70℃,相对湿度40%;在80℃,40%RH下20分钟。多级流化床系统显示出独特的潜力,可通过工业可行的方法使脱脂奶粉中的乳糖明显结晶。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号