Yttrium silicate coatings by sol precursor plasma spraying for environmental barrier applications

摘要

Yttrium silicates are among the candidates for protection of silicon-based ceramics in high temperature and moist environments due to chemical and mechanical compatibility with substrate, low volatility and moisture resistance. Here we reported on the development of yttrium silicate coatings by sol precursor plasma spraying. The use of a sol feedstock allowed easy composition flexibility. The microstructure and the structure of as-sprayed and heattreated coatings were investigated. Finer microstructure was obtained compared to micrometric powder plasma spraying traditionally used to produce environmental barrier coatings (EBC). XRD analyses on as-sprayed coatings revealed amorphous or crystalline layers depending on plasma parameters. In EBC application, a volume change from crystallization or phase transformation was envisaged to be damaging due to induced stresses and fully crystalline phases are a key durability requirement for EBC from conventional plasma spraying. Yttrium silicates are characterized by an important polymorphism and the ability to form amorphous coatings. Therefore, special attention was so paid to the amorphous degree of the coatings.