首页> 外文期刊>The International journal of oral & maxillofacial implants >Cell Attachment Following Instrumentation with Titanium and Plastic Instruments, Diode Laser, and Titanium Brush on Titanium, Titanium-Zirconium, and Zirconia Surfaces
【24h】

Cell Attachment Following Instrumentation with Titanium and Plastic Instruments, Diode Laser, and Titanium Brush on Titanium, Titanium-Zirconium, and Zirconia Surfaces

机译:用钛和塑料仪器,二极管激光器和钛刷在钛,钛锆和氧化锆表面上进行仪器化之后的细胞附着

获取原文
获取原文并翻译 | 示例
           

摘要

Purpose: The aim of this study was to evaluate the surface characteristics and gingival fibroblast adhesion of disks composed of implant and abutment materials following brief and repeated instrumentation with instruments commonly used in procedures for implant maintenance, stage-two implant surgery, and peri-implantitis treatment. Materials and Methods: One hundred twenty disks (40 titanium, 40 titanium-zirconium, 40 zirconia) were grouped into treatment categories of instrumentation by plastic curette, titanium curette, diode microlaser, rotary titanium brush, and no treatment. Twenty strokes were applied to half of the disks in the plastic and titanium curette treatment categories, while half of the disks received 100 strokes each to simulate implant maintenance occurring on a repetitive basis. Following analysis of the disks by optical laser profilometry, disks were cultured with human gingival fibroblasts. Cell counts were conducted from scanning electron microscopy (SEM) images. Results: Differences in surface roughness across all instruments tested for zirconia disks were negligible, while both titanium disks and titanium-zirconium disks showed large differences in surface roughness across the spectrum of instruments tested. The rotary titanium brush and the titanium curette yielded the greatest overall mean surface roughness, while the plastic curette yielded the lowest mean surface roughness. The greatest mean cell counts for each disk type were as follows: titanium disks with plastic curettes, titanium-zirconium disks with titanium curettes, and zirconia disks with the diode microlaser. Conclusion: Repeated instrumentation did not result in cumulative changes in surface roughness of implant materials made of titanium, titanium-zirconium, or zirconia. Instrumentation with plastic implant curettes on titanium and zirconia surfaces appeared to be more favorable than titanium implant curettes in terms of gingival fibroblast attachment on these surfaces.
机译:目的:本研究的目的是评估在使用植入物维护,二期植入物手术和植入物周围炎的手术程序中普遍使用的仪器进行短暂和反复的器械植入后,对由植入物和基台材料组成的椎间盘的表面特性和牙龈成纤维细胞粘附的评估治疗。材料与方法:将120个圆盘(40个钛,40个钛-锆,40个氧化锆)分为塑料刮匙,钛刮匙,二极管微激光,旋转钛刷和不进行处理的仪器治疗类别。在塑料刮匙和钛刮匙治疗类别中,将一半的圆盘施加20个笔触,而一半的圆盘分别接受100个笔触,以模拟重复进行的种植体维护。在通过光学激光轮廓测定法分析盘之后,将盘与人牙龈成纤维细胞一起培养。从扫描电子显微镜(SEM)图像进行细胞计数。结果:在所有测试过的氧化锆圆盘上,仪器的表面粗糙度差异可以忽略不计,而钛圆盘和钛锆圆盘在整个测试光谱范围内均显示出较大的表面粗糙度差异。旋转钛刷和钛刮匙产生的平均表面粗糙度最大,而塑料刮匙产生的平均表面粗糙度最低。每种磁盘类型的最大平均电池数量如下:带塑料刮匙的钛磁盘,带钛刮匙的钛锆磁盘和带二极管微激光的氧化锆磁盘。结论:重复使用仪器不会导致由钛,钛锆或氧化锆制成的植入材料表面粗糙度的累积变化。就在这些表面上的牙龈成纤维细胞附着而言,在钛和氧化锆表面上使用塑料植入物刮匙的器械似乎比钛植入物刮匙更有利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号