首页> 外文期刊>Carbohydrate Polymers: Scientific and Technological Aspects of Industrially Important Polysaccharides >Water vapor permeability of cotton fabrics coated with shape memory polyurethane
【24h】

Water vapor permeability of cotton fabrics coated with shape memory polyurethane

机译:形状记忆聚氨酯涂层棉织物的透湿性

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper,we have investigated the water vapor permeability of shape memory polyurethane(SMPU)coated cotton fabrics.The SMPUs were tailor made in order to obtain the phase transition temperature(soft segment crystal melting temperature)in the room temperature range.SEM studies were carried out in order to investigate the surface structure of coated and uncoated fabrics.The temperature sensitive water vapor permeability at soft segment crystal melting point was observed for SMPU coated fabrics.When the experimental temperature reached the soft segment crystal temperature of SMPU,an abrupt change of water vapor permeability of SMPU coated fabrics were observed.The significant change of water vapor permeability of SMPU coated fabrics is due to the phase change of SMPU which causes density changes inside the membranes due to micro-Brownian motion of soft segment,therefore,enhanced the water vapor permeability through the coated fabrics.The water vapor permeability of coated fabrics was also dependent on the primary structure of SMPU.When polycaprolactone glycol(PCL,M_n 3000 g mol~(-1))was introduced in the polytetramethylene glycol(PTMG,M_n 2900 g mol~(-1))based SMPU,the water vapor permeability decreases due to the increased interaction between the polymer chains due to presence of ester groups.In contrast increase of polyethylene glycol(M_n 3400 g mol~(-1))in the SMPU backbone,the WVP increases due to the increasing hydrophilicity of the SMPU.
机译:本文研究了形状记忆聚氨酯(SMPU)涂层棉织物的水蒸气透过性。对SMPU进行了定制,以获得室温范围内的相变温度(软链段晶体熔化温度)。为了研究涂层和未涂层​​织物的表面结构,观察了SMPU涂层织物在软链段晶体熔点的水敏透湿性。当实验温度达到SMPU的软链段晶体温度时,突然观察到SMPU涂层织物的水蒸气渗透率发生了变化。SMPU涂层织物的水蒸气渗透率的显着变化是由于SMPU的相变,由于软段的微布朗运动引起膜内部的密度变化,因此,增强了涂层织物的水蒸气渗透性。涂层织物的水蒸气渗透性为当将聚己内酯二醇(PCL,M_n 3000 g mol〜(-1))引入基于聚四亚甲基二醇(PTMG,M_n 2900 g mol〜(-1))的SMPU中时,水蒸气由于存在酯基而使聚合物链之间的相互作用增加,渗透性降低。相反,SMPU主链中的聚乙二醇(M_n 3400 g mol〜(-1))增加,WVP的增加是由于其亲水性增加。 SMPU。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号