Structure of calcium titanate/titania bioceramic composite coatings on titanium alloy and apatite deposition on their surfaces in a simulated body fluid

摘要

In this study, TiO2-based coatings containing Ca and P ions were prepared on titanium alloy surfaces by microarc oxidation (MAO). After soaking in aqueous NaOH solution and subsequent heat treatment at 700 and 800 degrees C, calcium titanate/titania biocerarnic composite (CTBC) coatings were obtained. The results show that the outer layers (0-1.5 mu m) of the CTBC coatings are mainly composed of Ca, Ti, O and Na constituents with a uniform distributions with increasing the depth near the surfaces. The surface phase compositions of the CTBC coating formed at 700 degrees C are anatase, rutile and CaTi21O38 phases, as well as a few CaTiO3, while those of the CTBC coating formed at 800 degrees C are anatase, rutile and CaTiO3. When incubated in a simulated body fluid (SBF), apatite was deposited on the CTBC coatings probably via formation of hydroxyl functionalized surface complexes on the CTBC coating surfaces by ionic exchanges between (Ca2+, Na+) ions of the CTBC coatings and H3O+ ions in the SBF. The CTBC coating formed at 800 degrees C seems to facilitate the deposition of Ca and P probably due to the good crystallographic match between perovskite CaTiO3 and HA on specific crystal planes. (c) 2007 Elsevier B.V. All rights reserved.