【24h】

Synthesis of nanocrystalline metallic iron from secondary iron oxide resources

机译:利用二次氧化铁资源合成纳米晶金属铁

获取原文
获取原文并翻译 | 示例
           

摘要

The reduction of mill scale into nanocrystallites metallic iron was studied. The powder samples of iron oxides (mill scale) were mixed with different ratios of space holder material (3, 6 and 9 percent starch) and then pelletised before being fired at 1000 deg C for 1 h in a muffle furnace. The fired pellets were reduced in hydrogen atmosphere at 800 deg C using thermogravimetric techniques. The reduced products were characterised using X-ray diffraction analysis technique, scanning electron microscope and vibration sample magnetometer. The presence of starch has a great effect on the physicochemical properties of produced metallic iron during reduction of the fired mixed pellets. Nanocrystalline size of the produced metallic iron was found to be gradually decreased from 114.1 to 66.1 nm with increasing pellets starch content from 0 to 9 percent respectively. Soft magnetic nano-iron metal was formed with H_c ranged from 18.4 to 30.98 O_e, B_r from 4.3 to 6.7 emu g~(-1) and B_s from 60.8 to 101 emu g~(-1).
机译:研究了将轧制氧化皮还原为纳米微晶金属铁。将氧化铁的粉末样品(工厂规模)与不同比例的空间保持剂材料(3%,6%和9%的淀粉)混合,然后制成颗粒,然后在马弗炉中于1000摄氏度下烧成1小时。使用热重技术在800℃的氢气气氛中将焙烧的粒料还原。使用X射线衍射分析技术,扫描电子显微镜和振动样品磁力计对还原产物进行表征。淀粉的存在对煅烧混合粒料还原过程中产生的金属铁的物理化学性质有很大影响。发现所产生的金属铁的纳米晶体尺寸从114.1nm逐渐减小至66.1nm,而粒料淀粉含量分别从0%增加至9%。形成软磁性纳米铁金属,其H_c为18.4〜30.98 O_e,B_r为4.3〜6.7 emu g·(-1),B_s为60.8〜101 emu g·(-1)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号