首页> 外文期刊>Transactions of the Institutions of Mining and Metallurgy, Section B. Applied Earth Science >Graphical representation of production results versus estimates in placer mining
【24h】

Graphical representation of production results versus estimates in placer mining

机译:砂矿开采中生产结果与估算值的图形表示

获取原文
获取原文并翻译 | 示例
       

摘要

Placer deposits are renowned for the difficulties inherent in the estimation of their mineral reserves. Mining and treatment often produce a recovered grade very different from that originally estimated. A measure traditionally used in the placer mining industry to report such technical performance is the ratio of recovered grade to estimated grade. The ratio, referred to as a factor, is determined and reported for a specified duration of continuous mining or for a mining block size. Over the life of mine numerous data pairs are generated for the estimated grade and the corresponding factor. The frequently inverse relationship between the two measures is expressed graphically on a scatter plot. Logarithmic scales are used for both the independent variable (estimated grade) and the dependent variable (factor). The factor may vary widely, and best-fit trend lines are derived by using either power or quadratic polynomial formulae. The relative estimated grade (each estimate divided by the average of all estimates of grade within the mined extent of a placer) may replace estimated grade as the independent variable. The graphical representation allows performance to be compared and contrasted for different mineral placers and mining methods employing diverse units of grade measurement.Model trend lines result from the direction of mining in the longitudinal and transverse dimensions of the placer. The mining site, whether in the proximal or distal zone of the placer, also influences the form of the model. Other parameters, apart from estimated grade, affect the factor. They include sample support, sample spacing and method of mining. Sampling density and the duration of the reporting period determine the degree of slope and the curvature of the trend line. An important model results from attempting to exploit marginal grade outliers. Uses of the plot include monitoring the effects of changes in operational policy, mine planning and revenue forecasting. The average, historic factor achieved in a deposit, in places used as a correction factor, is not always a reliable indicator of future performance in the same placer. Care should be applied when using such a factor to substantiate reserve estimates. The simple graphical technique continues to be employed, and its application is not limited to placers.
机译:砂金矿床因估算其矿藏的固有困难而闻名。采矿和处理通常会产生与最初估计的品位非常不同的恢复品位。砂矿开采行业传统上用来报告此类技术性能的一种度量是回收品位与估算品位的比率。在指定的连续开采持续时间或开采区块大小中确定并报告该比率,称为因子。在矿山的生命周期中,针对估计的品位和相应的因子生成了许多数据对。两种度量之间的频繁逆关系在散点图上以图形方式表示。对数标度用于自变量(估计等级)和因变量(因子)。该因子可能变化很大,并且可以使用幂或二次多项式公式得出最佳拟合趋势线。相对估计等级(每个估计除以在砂矿开采范围内所有等级的所有估计的平均值)可以代替估计等级作为自变量。图形表示允许比较和对比使用不同品位测量单位的不同矿物砂矿和采矿方法的性能。模型趋势线来自砂矿纵向和横向尺寸的采矿方向。开采地点,无论是在砂矿的近端还是远端,都会影响模型的形式。除了估计的等级,其他参数也会影响该因子。它们包括样品支持,样品间距和采矿方法。抽样密度和报告期间的持续时间决定了趋势线的斜率和曲率。一个重要的模型来自尝试利用边际等级离群值。该地块的用途包括监视运营政策,矿山计划和收入预测方面的变化。在用作校正因子的场所中,沉积物中获得的平均历史性因素并不总是可靠地表明同一矿床中未来性能的指标。当使用这种因素来证实准备金估计时,应格外小心。继续采用简单的图形技术,其应用不限于放置器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号