首页> 外文期刊>The Journal of arthroplasty >Long-Term Results of Total Hip Arthroplasty with 28-Millimeter Cobalt-Chromium Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years and Less
【24h】

Long-Term Results of Total Hip Arthroplasty with 28-Millimeter Cobalt-Chromium Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years and Less

机译:在50岁及以下患者中使用高度交联的聚乙烯进行28毫米钴铬钴合金股骨头全髋关节置换术的长期结果

获取原文
获取原文并翻译 | 示例
       

摘要

Highly cross-linked polyethylene (HXLPE) is the most commonly used bearing surface in total hip arthroplasty (THA) because of its superior wear properties, but long-term results in young patients are limited. We report on the clinical outcome, radiographic wear patterns and survivorship of 72 patients <= 50 years old who had a 28-millimeter cobalt-chromium femoral head on HXLPE acetabular liner. Mean and median true linear wear rates at average ten-year follow-up were 0.0104 and 0.016 mm per year +/- 0.07 mm. Mean and median two-dimensional volumetric wear rates were 12.79 mm(3) and 5.834 mm(3) per year +/- 26.1 mm(3) as determined by Martell analysis. As a result of the minimal wear profile, there was no evidence of radiographic osteolysis and no wear-related revisions. (C)2016 Elsevier Inc. All rights reserved.
机译:高度交联的聚乙烯(HXLPE)是全髋关节置换术(THA)中最常用的支承面,因为它具有优越的耐磨性,但长期影响年轻患者的效果有限。我们报告了72名<= 50岁的患者的临床结局,影像学穿像方式和存活率,这些患者在HXLPE髋臼内衬上有28毫米钴铬合金股骨头。平均十年随访的平均和中值真实线性磨损率分别为0.0104和0.016毫米/年+/- 0.07毫米。由Martell分析确定,平均和中位二维体积磨损率为每年12.79 mm(3)和5.834 mm(3)+/- 26.1 mm(3)。由于磨损极小,因此没有影像学上的骨溶解证据,也没有与磨损有关的翻修。 (C)2016 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号