...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >Ion mobility time-of-flight measurements: isolating the mobility of charge carriers during an epoxy-amine reaction
【24h】

Ion mobility time-of-flight measurements: isolating the mobility of charge carriers during an epoxy-amine reaction

机译:离子迁移率飞行时间测量:隔离环氧胺反应过程中电荷载流子的迁移率

获取原文
获取原文并翻译 | 示例

摘要

Ion mobility time-of-flight (ITOF) measurements can isolate the mobility of the charge carriers during a chemical reaction. The ITOF technique complements conductivity measurements. Together they more accurately monitor changes in the chemical and physical properties such as viscosity of a material as it polymerizes. The use of conductivity due to migration of charges to monitor the advancement of reaction has been widely reported. It is commonly assumed that a correlation should exist between the decrease in conductivity, and the increasing viscosity and/or extent of reaction. This is based on the assumption that the number of charge carriers in the polymer-forming system is constant. Unfortunately, this assumption is not correct in an epoxy/amine system where the number of OH groups and NH groups changes as the reaction advances.The epoxy-amine reaction (diglycidyl ether of bisphenol-A (DGEBA)/amine 4,4'-methylene bis[3-chloro 2,6-diethylaniline] (MCDEA)) was investigated by ITOF and dielectric measurement. Together these two techniques were used to separately monitor the changes in the ion mobility and the number of charge carriers. Parameters, such as voltage, pulse length and sensor geometry, were determined and optimized to obtain the repeatable results. The results were compared to dynamic mechanical measurements and the reaction advancement. A most interesting finding is the significant changes in the number of charge carriers during the reaction at the three different temperatures measured. An explanation of the observed changes in ion mobility and the number of charge carriers is offered in terms of the inter-relationship of the changing chemical structure and the density of an epoxy during cure. (C) 2004 Elsevier Ltd. All rights reserved.
机译:离子迁移率飞行时间(ITOF)测量可以隔离化学反应过程中电荷载流子的迁移率。 ITOF技术是对电导率测量的补充。它们一起可以更准确地监视化学和物理特性的变化,例如聚合时材料的粘度。广泛报道了由于电荷的迁移而使用电导率来监测反应的进展。通常认为,电导率的降低与粘度和/或反应程度的增加之间应存在相关性。这是基于这样的假设,即聚合物形成系统中载流子的数量是恒定的。不幸的是,这种假设在环氧/胺体系中是不正确的,在该体系中,OH基和NH基的数目随反应的进行而变化。环氧胺反应(双酚A的二缩水甘油醚(DGEBA)/胺4,4'-亚甲基双[3-氯2,6-二乙基苯胺](MCDEA))通过ITOF和介电测量进行了研究。这两种技术一起用于分别监视离子迁移率和载流子数量的变化。确定并优化参数(例如电压,脉冲长度和传感器几何形状)以获得可重复的结果。将结果与动态力学测量和反应进展进行比较。一个最有趣的发现是在三种不同温度下,反应过程中载流子数量的显着变化。根据化学结构的变化与固化过程中环氧树脂的密度之间的相互关系,对观察到的离子迁移率和载流子数量的变化进行了解释。 (C)2004 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号