Progress in stacked piezocomposite ultrasonic transducers for low frequency applications

摘要

A stacked ultrasonic transducer comprises multiple individual layers connected mechanically in series and electrically in parallel to reduce the fundamental thickness mode resonance to a frequency corresponding to the transit time of the completestack and the electrical impedance to a value which corresponds to that of the layers of the stack in parallel. In turn. this allows lower frequency resonant operation than would be possible with a single layer, and facilitates electrical impedancematching to typical transmission circuitry. On transmission, an ideal stack of uniform layers will have an output amplitude larger than that of the equivalent single layer by a factor equal to the. However, using conventional signal amplificationcircuitry on reception, the output voltage amplitude will be smaller than that of the equivalent single layer by a similar factor. In the past stacks have commonly been assembled from layers of conventional piezoceramic material but more recently therehave been reports of stacks of 1-3 piezocomposites and it is this type that is considered here. The work described in this paper is motivated by the need to operate at frequencies lower than are possible using conventional piezocomposite fabricationtechnology. Progress in comparison of experimental and simulated results is outlined and the highlights of a theoretical design study are presented. These show that although the general behaviour of a stacked structure is easily predicted. a rigoroustheoretical analysis is essential to understand the detail of even a limited range of possible designs.