首页> 外文期刊>Propellants, Explosives, Pyrotechnics >Shaped Charge Jet Initiation Tests with Covered High Explosive Charges with Air Gaps
【24h】

Shaped Charge Jet Initiation Tests with Covered High Explosive Charges with Air Gaps

机译:带气隙的高爆炸装药的定型射流起爆试验

获取原文
获取原文并翻译 | 示例
           

摘要

Tests have been carried out with 5 mm thick plastic discs introduced in a 10 mm large air gap in split high explosive charges. If the second charge has a 5 mm air gap behind the 5 mmm polyethylene disc a relatively prompt initiation is given. If the air gap behind the 5 mm plastic disc is only 2.5mm an initiation occurs only in the forward direction which starts with a large build-up distance and a long starting delay time without any retonation. Finally with direct contact of the 5 mm thick plastic disc to the second charge no detonation starts in the given geometry. These tests do not confirm the initiation theory to avoid impacxts of powdered high explosive charge particles which can cause the initiation of the second charge. The reason could be the earlier discussed desensitization by the precompression of the bulging cover material into the high explosive charge.
机译:已经对5mm厚的塑料圆盘进行了测试,该塑料圆盘在10mm大的气隙中以高分批炸药装填。如果第二次装药在5毫米聚乙烯圆盘后面有5毫米气隙,则给出相对迅速的引发。如果5毫米塑料盘后面的气隙仅为2.5毫米,则引发仅在向前方向发生,该开始以较大的堆积距离和较长的启动延迟时间开始,而没有任何起爆。最后,在5mm厚的塑料圆盘与第二次装料直接接触的情况下,在给定的几何形状下不会发生爆炸。这些测试并未证实引发理论,以避免粉末状高爆炸性装药颗粒的爆炸可能引起第二次装药的引发。原因可能是前面讨论的通过将凸起的覆盖层材料预压缩到高爆炸装药中而引起的脱敏。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号