首页> 外文期刊>Progress in Rubber and Plastics Technology >Melt Rheology of Thermoplastic Elastomers from High Density Polyethylene/Styrene-Butadiene Rubber Blends: Effect of Blend Ratio and Dynamic Vulcanization
【24h】

Melt Rheology of Thermoplastic Elastomers from High Density Polyethylene/Styrene-Butadiene Rubber Blends: Effect of Blend Ratio and Dynamic Vulcanization

机译:高密度聚乙烯/苯乙烯-丁二烯橡胶混合物的热塑性弹性体的熔体流变学:混合比和动态硫化的影响

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The melt rheological behavior of HDPE/Styrene butadiene Rubber blends has been investigated with special reference to the effect of blend ratio,shear stress and temperature using capillary rheometer.HDPE/SBR blends show pseudoplastic behavior,which evidenced by the decrease in viscosity with increase in shear rate.The flow behavior index also support the pseudoplastic nature of these blends.The viscosity of the blends increase as the amount of SBR increases.The shear viscosity versus composition of the blends showed negative deviation,which is more pronounced at low shear rates.Various theoretical models are used to predict the melt viscosity of the blends.The influence of dynamic crosslinking using different curing systems on the rheological properties of the blends has been analyzed.A shear-rate superpostion analysis has been done to predict the melt viscosities of the system as a function of temperature.Using a plot of modified shear stress versus shear rates;it is seen that various curves were unified as a single master curve.
机译:使用毛细管流变仪研究了HDPE /苯乙烯-丁二烯橡胶共混物的熔体流变行为,并特别考虑了共混比,剪切应力和温度的影响.HDPE / SBR共混物表现出假塑性行为,其表现为随着粘度的增加粘度降低。流动行为指数也支持了这些共混物的假塑性特性。随着SBR含量的增加,共混物的粘度增加。剪切粘度与共混物的组成呈负偏差,这在低剪切速率下更为明显。各种理论模型用于预测共混物的熔融粘度。分析了不同固化体系的动态交联对共混物流变性能的影响;进行了剪切速率超浆度分析以预测共混物的熔融粘度。系统是温度的函数,使用修改后的剪切应力与剪切速率的关系图可以看出曲线统一为一条主曲线。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号