...
首页> 外文期刊>Biomechanics and modeling in mechanobiology >Velocity profiles in the human ductus venosus: A numerical fluid structure interaction study
【24h】

Velocity profiles in the human ductus venosus: A numerical fluid structure interaction study

机译:人导管静脉速度分布:数值流体结构相互作用研究

获取原文
获取原文并翻译 | 示例
           

摘要

The veins distributing oxygenated blood from the placenta to the fetal body have been given much attention in clinical Doppler velocimetry studies, in particular the ductus venosus. The ductus venosus is embedded in the left liver lobe and connects the intra-abdominal portion of the umbilical vein (IUV) directly to the inferior vena cava, such that oxygenated blood can bypass the liver and flow directly to the fetal heart. In the current work, we have developed a mathematical model to assist the clinical assessment of volumetric flow rate at the inlet of the ductus venosus. With a robust estimate of the velocity profile shape coefficient (VC), the volumetric flow rate may be estimated as the product of the time-averaged cross-sectional area, the time-averaged cross-sectional maximum velocity and the VC. The time average quantities may be obtained from Doppler ultrasound measurements, whereas the VC may be estimated from numerical simulations. The mathematical model employs a 3D fluid structure interaction model of the bifurcation formed by the IUV, the ductus venosus and the left portal vein. Furthermore, the amniotic portion of the umbilical vein, the right liver lobe and the inferior vena cava were incorporated as lumped model boundary conditions for the fluid structure interaction model. A hyperelastic material is used to model the structural response of the vessel walls, based on recently available experimental data for the human IUV and ductus venous. A parametric study was constructed to investigate the VC at the ductus venosus inlet, based on a reference case for a human fetus at 36 weeks of gestation. The VC was found to be 0.687,pm ,0.023 (Mean pm SD of parametric case study), which confirms previous studies in the literature on the VC at the ductus venosus inlet. Additionally, CFD simulations with rigid walls were performed on a subsection of the parametric case study, and only minor changes in the predicted VCs were observed compared to the FSI cases. In conclusion, the presented mathematical model is a promising tool for the assessment of ductus venosus Doppler velocimetry.
机译:从胎盘向胎儿体内分配含氧血液的静脉在临床多普勒测速研究中,尤其是在静脉导管中,已引起了广泛关注。静脉导管嵌在左肝叶中,并将脐静脉(IUV)的腹腔内部分直接连接至下腔静脉,这样含氧血液可以绕过肝脏并直接流向胎儿心脏。在当前的工作中,我们已经开发了一个数学模型来协助临床评估导管静脉入口的容积流速。通过对速度分布形状系数(VC)进行可靠的估计,可以将体积流速估计为时间平均横截面积,时间平均横截面最大速度和VC的乘积。可以从多普勒超声测量中获得时间平均量,而可以从数值模拟中估算VC。该数学模型采用了由IUV,静脉导管和左门静脉形成的分叉的3D流体结构相互作用模型。此外,将脐静脉的羊膜部分,右肝叶和下腔静脉纳入为流体结构相互作用模型的集总模型边界条件。基于人类IUV和导管静脉的最新可用实验数据,使用超弹性材料来模拟血管壁的结构响应。根据妊娠36周时胎儿的参考案例,进行了一项参数研究,以研究静脉导管入口处的VC。发现VC为0.687 , pm ,0.023(参数案例研究的平均 pm SD),这证实了先前文献中关于导管静脉入口的VC的研究。此外,在参数化案例研究的一个小节中进行了带有刚性壁的CFD仿真,与FSI案例相比,仅观察到了预测VC的微小变化。总之,提出的数学模型是评估导管静脉多普勒测速的有前途的工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号