...
首页> 外文期刊>Polymers & Polymer Composites >Microencapsulation of Hydrophilic Solid Powder as a Fire Retardant by the Method of in situ Gelation in Droplets Using a Non-aqueous Solvent as the Continuous Phase
【24h】

Microencapsulation of Hydrophilic Solid Powder as a Fire Retardant by the Method of in situ Gelation in Droplets Using a Non-aqueous Solvent as the Continuous Phase

机译:以非水溶剂为连续相的液滴原位凝胶化方法将亲水性固体粉末微囊化为阻燃剂

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Hydrophilic,solid,powdery diammonium bitetrazole(BHT.2NH3)as a fire retardant was microencapsulated with epoxy resin by the method of in situ gelation in droplets to give water resistance.In this method,a nonaqueous solvent was adopted as the continuous phase instead of water to prevent the hydrophilic core material from leaking out.In the experiment,it was mainly the agitation speeds during preparation of droplets containing BHT.2NH3 and during the microencapsulation process,the gelation temperature,and the oil-soluble surfactant species that were varied.The content of core material could be increased by using a non-aqueous solvent instead of water phase.The content of core material increased with gelation temperature and independently of the agitation speeds during first droplet preparation and during the microencapsulating process.The leakage ratio increased with agitation speeds and decreased considerably with gelation temperature.
机译:通过滴入原位胶凝的方法,用环氧树脂将亲水,固态,粉末状的二铵比他唑(BHT.2NH3)微囊化,并用环氧树脂将其微囊化,以使其具有耐水性。在该方法中,采用非水溶剂代替连续相在实验中,主要是在制备含BHT.2NH3的微滴过程中以及微囊化过程中的搅拌速度,胶凝温度和油溶性表面活性剂种类有所变化。通过使用非水溶剂代替水相可以增加核心材料的含量。核心材料的含量随着胶凝温度的升高而增加,并且在首次液滴制备和微囊化过程中与搅拌速度无关,泄漏率随着搅拌速度随胶凝温度而明显降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号