首页> 外文期刊>Polimery >Effect of electron-beam irradiation on structure of ultra high molecular weight polyethylene used in medical implants
【24h】

Effect of electron-beam irradiation on structure of ultra high molecular weight polyethylene used in medical implants

机译:电子束辐照对医用植入物中超高分子量聚乙烯结构的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Effect of electron beam irradiation with a dose equivalent to that used in practice during radiation sterilization of endoprostheses(26 kGy)or twice higher(2(center dot26 kGy)on the change of UHMW-PE structure.UHMW-PE(trade name Chirulen 1120)is used for preparation of cups of hip endoprostheses.Structural changes of the polymer have been investigated using FT-IR method.Mainly the results of polymer oxidation(increase in the part of car-bonyl groups of ketone,ester and perester types as well as of hydroxyl and vinyl groups)have been found.It was also found,using GPC method,that irradiation caused also partial degradation of macromolecules(reduction of molecular weight one order of magnitude)and crosslinking processes were favored by macroradicals formed(gel fraction part about 40 %,increase in melting temperature as well as in crystallinity degree).
机译:UHMW-PE结构变化对电子束辐照剂量的影响等效于内置假体辐射灭菌过程中实际使用的剂量(26 kGy)或两倍以上(2(中心点26 kGy))对UHMW-PE结构变化的影响。 )用于制备髋关节杯内固定物。使用FT-IR方法研究了聚合物的结构变化。主要是聚合物氧化的结果(酮,酯和过酸酯类型的碳羰基部分也增加了)还发现,使用GPC方法,辐射还会引起大分子的部分降解(分子量降低一个数量级),并且形成的大分子自由基有利于交联过程(凝胶部分)熔化温度和结晶度增加约40%)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号