【24h】

The fate of the slabs interacting with a density/viscosity hill in the mid-mantle

机译:平板的命运与地幔中部的密度/粘性山相互作用

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In the last two decades it has been proposed several times that a non-monotonic profile might fit the average lower mantle radial viscosity. Most proposed profiles consist in a more or less broad viscosity hill in the middle of the mantle, at a depth roughly between 1200. km and 2000. km. Also many tomographic models display strong signals of the presence of " fast" material lying at mid mantle depths and a recent spectral analysis of seismic tomography shows a very clear transition for degree up to around 16 at a less than 1500. km depth. Finally latest works, both theoretical and experimental, on the high-to-low-spin transition for periclase, have suggested that the high-spin to low-spin transition of Fe++ might lie at the heart of all these observations. To verify the dynamical compatibility between possible mantle profile and observed tomographic images and compare them with possible mineral physics scenarios, such as the spin transition, we employ here a recently developed Fast Multipole-accelerated Boundary Element Method (FMM-BEM), a numerical approach for solving the viscous momentum equation in a global spherical setting, for simulating the interaction of an individual slab with a mid mantle smooth discontinuity in density and viscosity. We have focused on the complexities induced to the behaviour of average and very large plates O (2000-10,000. km), characteristic of the Farallon, Tethys and Pacific plate subducting during the Cenozoic, demonstrating that the a mid mantle density and/or viscosity discontinuity produces a strong alteration of the sinking velocity and an intricate set of slab morphologies. We also employ the Kula-Farallon plate system subducting at 60. Ma as a paradigmatic case, which reveals the best high resolution tomography models and clearly suggests an interaction with a strong and/or denser layer in the mantle. Our 38 models show that a plate might or might not penetrate into the lowest mantle and might stall in the mid lower mantle for long periods, depending on the radial profiles of density and viscosity, within a realistic range (viscosity 1, 10 or 100 times more viscous of the rest of the mantle, and a change of differential density in the range -2% to 2%), of a transitional layer of 200. km or 500. km. We conclude that a layer with high viscosity or negative density would naturally trigger the observed geodynamic snapshot. We finally propose a scenario in which the long time accumulation of depleted slabs in the mid mantle would give rise to a partially chemically stratified mantle, starting from the less prominent high-spin to low-spin contribution on the basis of mantle density and rheology.
机译:在过去的二十年中,已经多次提出非单调轮廓可能适合平均下地幔径向粘度。大多数提出的剖面图都位于地幔中部或多或少较宽的粘性丘陵中,深度大约在1200. km至2000. km之间。同样,许多层析成像模型显示出强烈的信号,表明存在位于地幔中部深度的“快速”物质,而地震层析成像的最新频谱分析显示,在小于1500 km的深度处,高达16度的变化非常明显。最后,关于perlase的由高到低自旋转变的最新理论和实验研究表明,Fe ++从高自旋到低自旋的转变可能是所有这些观察结果的核心。为了验证可能的地幔剖面和断层图像之间的动态兼容性,并将其与可能的矿物物理情况(例如自转转变)进行比较,我们在这里采用了最近开发的快速多极加速边界元方法(FMM-BEM),一种数值方法用于在整体球形环境中求解粘性动量方程,用于模拟单个板与中地幔在密度和粘度上平滑不连续的相互作用。我们集中研究了新生代中法拉隆,特提斯和太平洋板块俯冲的特征,即普通大板O(2000-10,000。km)的行为引起的复杂性,表明中地幔的密度和/或粘度不连续性会导致下沉速度的强烈变化以及复杂的平板形态。我们还采用了在60. Ma处俯冲的Kula-Falallon板系统,作为一个典型案例,它揭示了最佳的高分辨率层析成像模型,并清楚地表明了与地幔中强和/或致密层的相互作用。我们的38个模型表明,板块可能会或可能不会渗入最低的地幔中,并可能长时间停留在下地幔中部,具体取决于密度和粘度的径向分布,在实际范围内(粘度为1、10或100倍在200. km或500. km的过渡层中,其余地幔的粘性更大,并且差分密度在-2%到2%的范围内变化。我们得出结论,具有高粘度或负密度的层自然会触发观测到的地球动力学快照。我们最终提出了一种方案,其中耗尽的板块长时间积聚在中地幔中会导致部分化学分层的地幔,从地幔密度和流变学的角度出发,从不太显着的高旋向低旋贡献开始。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号