首页> 外文期刊>Wood Science and Technology >Inter-clonal, intra-clonal, and single tree variations of wood anatomical properties and specific gravity of clonal ramets of Dalbergia sissoo Roxb
【24h】

Inter-clonal, intra-clonal, and single tree variations of wood anatomical properties and specific gravity of clonal ramets of Dalbergia sissoo Roxb

机译:Dalbergia sissoo Roxb的木材解剖学特性和克隆分株的比重的克隆间,克隆内和单树变异

获取原文
获取原文并翻译 | 示例
           

摘要

Inter-clonal, intra-clonal and within tree variations in specific gravity and wood anatomical properties of 8-year-old grown ramets of Dalbergia sissoo Roxb. have been investigated. Radial and location-wise intra-clonal variations were non-significant for anatomical properties and specific gravity for all six clones at all three sites. However, inter-clonal variations in wood anatomical properties and specific gravity were significantly different. Inter-clonal variations in anatomical properties and specific gravity were also significant due to sites, which indicated that site-characteristics overshadowed the genetic priority of different clones for wood anatomical properties. Average fiber-characteristics of all clones showed the best performance at Lalkuan, Haldwani (site Ⅲ), while average specific gravity performed well at Brandis Road, Dehradun (site Ⅰ) followed by site Ⅲ (Lalkuan, Haldwani) and site Ⅱ (Lachchiwala, Dehradun). Within tree variations in anatomical properties like fiber length, fiber diameter, wall thickness, vessel member length and vessel member diameter due to vertical or radial direction and location (pith to periphery) are non-significant. Radial direction, location and height showed no impact on wood element variation. It indicated that there is no impact of juvenile wood, sapwood and heart-wood ratio, and reaction wood on wood anatomical properties of 8-year-old ramet of D. sissoo. It further indicated that clone raised ramet of 8-year-old D. sissoo showed the characteristics of mature wood. Within tree variations in specific gravity were significant due to height, which may be related to differential sapwood and heartwood ratio in the vertical direction. Different wood elements viz. fiber length, fiber diameter, wall thickness, vessel member length and vessel member diameter showed significant correlations with each other and with specific gravity.
机译:Dalbergia sissoo Roxb的8岁成年分株的克隆间,克隆内和树内比重和木材解剖特性的变化。已被调查。径向和位置内克隆内变异对于所有三个位点的所有六个克隆的解剖学性质和比重均无意义。但是,克隆之间的木材解剖学特性和比重差异显着不同。由于位点的不同,克隆间的解剖学特性和比重也很重要,这表明位点特性掩盖了不同克隆对于木材解剖学特性的遗传优先性。所有克隆的平均纤维特性在哈尔德瓦尼的Lalkuan(Ⅲ点)表现最好,而比重在Dehradun的Brandis Road(Ⅰ点)表现最佳,其次是Ⅲ(Lalkuan,Haldwani)和Ⅱ点(Lachchiwala, Dehradun)。在树内,由于垂直或径向方向和位置(从上到下),解剖学特性(如纤维长度,纤维直径,壁厚,血管成员长度和血管成员直径)的变化并不重要。径向,位置和高度对木材元素的变化没有影响。结果表明,幼材,边材和心材和木材的比例以及反应木材对8岁的D. sissoo分株的木材解剖学特性没有影响。进一步表明,无性系提高了8岁D. sissoo的分株表现出成熟木材的特性。在树内,由于高度,比重的变化是显着的,这可能与垂直方向上边材和心材的比例不同有关。不同的木元素,即。纤维长度,纤维直径,壁厚,容器构件长度和容器构件直径彼此之间以及与比重之间显示出显着的相关性。

著录项

  • 来源
    《Wood Science and Technology》 |2005年第5期|p.351-366|共16页
  • 作者

    P. K. Pande; Magan Singh;

  • 作者单位

    Wood Anatomy Discipline, Botany Division, Forest Research Institute, PO: New Forest, Dehradun, 248006, Uttaranchal, India;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 林业;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号