Effects of extraneous substances, wood density and interlocked grain on fiber saturation point of hardwoods

摘要

Samples of nine tropical hardwoods from Peru and sugar maple wood from Quebec were selected for moisture sorption and swelling tests at 25℃. These tests evaluated the fiber saturation point (FSP) by two methods: following adsorption over distilled water, and from the volumetric swelling intersection point. Cold-water and hot-water extractives, sequential cyclohexane, acetone and methanol extracts, ash content, wood density and interlocked grain were also determined on matched samples. The results indicated that adsorption tests over distilled water were not applicable for determining FSP in all wood species. Condensation of water vapor apparently occurred, even though temperature during adsorption was controlled to the nearest 0.01℃. The volumetric swelling intersection point method was judged more appropriate. FSP ranged from 15 to 25% for tropical hardwoods and was 30% for sugar maple wood. FSP was negatively correlated with wood density, acetone extracted fraction, interlocked grain and ash content. These parameters each exerted similar effects on variability in FSP.