首页> 外文期刊>Wind Energy >Aerodynamic response of an airfoil section undergoing pitch motion and trailing edge flap deflection: a comparison of simulation methods
【24h】

Aerodynamic response of an airfoil section undergoing pitch motion and trailing edge flap deflection: a comparison of simulation methods

机译:俯仰运动和后缘襟翼偏转对翼型截面的气动响应:仿真方法的比较

获取原文
获取原文并翻译 | 示例
           

摘要

The study presents and compares aerodynamic simulations for an airfoil section with an adaptive trailing edge flap, which deflects following a smooth deformation shape. The simulations are carried out with three substantially different methods: a Reynolds-averaged Navier-Stokes solver, a viscous-inviscid interaction method and an engineering dynamic stall model suitable for implementation in aeroelastic codes based on blade element momentum theory. The aerodynamic integral forces and pitching moment coefficients are first determined in steady conditions, at angles of attack spanning from attached flow to separated conditions and accounting for the effects of flap deflection; the steady results from the Navier-Stokes solver and the viscous-inviscid interaction method are used as input data for the simpler dynamic stall model. The paper characterizes then the dynamics of the unsteady forces and moments generated by the airfoil undergoing harmonic pitching motions and harmonic flap deflections. The unsteady aerodynamic coefficients exhibit significant variations over the corresponding steady-state values. The dynamic characteristics of the unsteady response are predicted with an excellent agreement among the investigated methods at attached flow conditions, both for airfoil pitching and flap deflection. At high angles of attack, where flow separation is encountered, the methods still depict similar overall dynamics, but larger discrepancies are reported, especially for the simpler engineering method. Copyright (c) 2014 John Wiley & Sons, Ltd.
机译:这项研究提出并比较了具有自适应后缘襟翼的翼型截面的空气动力学模拟,该尾翼沿平滑变形形状挠曲。仿真使用三种基本不同的方法进行:雷诺平均Navier-Stokes解算器,粘滞-无粘相互作用方法和适用于基于叶片单元动量理论在气动弹性代码中实现的工程动态失速模型。首先在稳定状态下确定气动积分力和俯仰力矩系数,其迎角从附着流到分离状态,并考虑襟翼偏转的影响。 Navier-Stokes求解器的稳定结果和粘性-无粘相互作用方法被用作更简单的动态失速模型的输入数据。然后,本文描述了机翼承受谐波俯仰运动和谐波襟翼偏转所产生的非定常力和力矩的动力学特性。非稳态空气动力学系数在相应的稳态值上显示出显着变化。在机翼俯仰和襟翼偏斜的附加流动条件下,非稳态响应的动态特性与研究方法之间的一致性极好。在高攻角处遇到流分离时,这些方法仍显示出相似的整体动力学,但是据报道存在较大差异,尤其是对于较简单的工程方法而言。版权所有(c)2014 John Wiley&Sons,Ltd.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号