Nitrate, arsenic and fluoride removal by electrodialysis from brackish groundwater

摘要

Nitrate, arsenic and fluoride are some of the most hazardous elements contaminating groundwater resources. In this work, the impact of operative (flowrate, electricpotential) and water quality (salinity, contaminant feed concentration, pH) parameters on brackish water decontamination was investigated using a batch electrodialysis (ED) system. Electrodialysis at low electric potentials (5 V) was more selective toward monovalent ions, at higher potentials (15 V) removal of all ions increased and selectivity approached one, meaning removal of all ions. Changing the flowrate from 30 to 70 L/h, increased nitrate and fluoride removal slightly, while arsenic(V) removal was maximum at 50 L/h. Rising salinity delayed removal of ions with low ionic mobility and diffusivity (i.e. fluoride, arsenic(V)). Increased feed concentration of contaminants had no impact on removal values. pH variations did not impact the nitrate, fluoride and salinity removal, yet arsenic(V) removal was greatly pH dependent. This was explained in part by lower diffusivity and higher hydration number of bi- and trivalent species of arsenic(V) at basic pH. The results of this work showed the significance of ionic characteristics (diffusivity, ionic mobility, hydration number) in ED. Nitrate concentrations satisfied guideline threshold in all experiments with concentrations below 50 mg/L. Lowest arsenic(V) concentration was 35 mu g/L at the highest electric potential, 25 V. Using ionic characteristics makes separation of different ions possible, providing new opportunities for ED in environmentally friendly processes (e.g. resource recovery and zero liquid discharge). (c) 2020 Elsevier Ltd. All rights reserved.