Optimization of the coagulation-flocculation process for pulp mill wastewater treatment using a combination of uniform design and response surface methodology

摘要

Pulp mill wastewater was treated using the coagulation-flocculation process with aluminum chloride as the coagulant and a modified natural polymer, starch-g-PAM-g-PDMC [polyacrylamide and poly (2-methacryloyloxyethyl) trimethyl ammonium chloride], as the flocculant. A novel approach with a combination of response surface methodology (RSM) and uniform design (UD) was employed to evaluate the effects and interactions of three main influential factors, coagulant dosage, flocculant dosage and pH, on the treatment efficiency in terms of the supernatant turbidity and lignin1 removals as well as the water recovery. The optimal conditions obtained from the compromise of the three desirable responses, supernatant turbidity removal, lignin removal and water recovery efficiency, were as follows: coagulant dosage of 871 mg/L, flocculant dosage of 22.3 mg/L and pH 8.35. Confirmation experiments demonstrated that such a combination of the UD and RSM is a powerful and useful approach for optimizing the coagulation-flocculation process for the pulp mill wastewater treatment.