Out-of-round railway wheels-a study of wheel polygonalization through simulation of three-dimensional wheel-rail interaction and wear

摘要

The objective of this study is to develop a too] for investigation of wheel tread polygonalization with radial irregularities including 1 to 20 wavelengths around the circumference of the wheel. Therefore, an existing multibody system model for simulation of general three-dimensional train -track interaction (accounting for frequencies up to several kHz) is extended with rolling contact mechanics according to FASTSIM. Furthermore, the model is also modified to allow for general wheel-rail profiles. The numerical model uses the concept of an iteration scheme including simulation of dynamic train-track interaction in the time domain coupled with a long-term wear model. A demonstration example including a bogie of a subway train travelling on a straight track is presented. In the example, an initial wheel out-of-roundness (OOR) is applied to the wheels. This irregularity is based on an amplitude spectrum derived from measurements on new wheels. Simulation results show that the most important wavelength-fixing mechanisms of the wheel OOR are (ⅰ) the vertical resonance of the coupled train-track system at approximately 40 Hz (the P2 resonance) and (ⅱ) the frequency region including the lowest vertical track antiresonance at 165 Hz, where the dynamic track stiffness is high. Only a straight track is studied, but the model allows for asymmetric train motion on such a track.