Comparison of deformation induced precipitation behaviour in Alloy 718 under two microstructural conditions

摘要

Alloy 718 samples under two initial microstructural conditions, viz., solution annealed to form only γ phase (ST) and aged to precipitate only δ particles (DELTA), were deformed in tension till fracture in the temperatures range from 200°C–700°C. From the comparison of the evolved microstructure of deformed and undeformed specimens that have been subjected to similar thermal history, deformation induced precipitation could be identified. Deformation in the range of 550°C to 650°C promoted the precipitation of γ′ and γ″ phases in both structures. In case of DELTA alloy, the γ′ precipitation was found to precede the γ′ phase precipitation while no such preference for precipitation could be identified in ST specimens. This difference in the precipitation behaviour and the sequence of precipitation has been explained on the basis of the relative concentration of solutes in the matrix of the starting microstructures of ST and DELTA specimens.