Effect of 3D random pitting defects on the collapse pressure of pipe - Part I: Experiment

摘要

This paper is aimed at assessing the effects of local random external pitting defects on the collapse pressure of pipe under external pressure. In this two-part paper series, the buckling performance of locally random corroded pipe was experimentally and numerically studied. The experimental program described in Part I involves seamless carbon steel tubes with D/t = 17 and with different size of pitting defects. The random pitting defects were introduced into the outside surface of pipe using 6% FeCl3 solution and then the collapse pressure of such locally random corroded pipe was obtained experimentally. The profile of pipe was examined in details using Hexagon's new RA7320 Portable Arm Coordinate Measuring Machine (PACMM) and the measured data were analyzed meticulously. It indicated that either the out-of-roundness imperfection shape n = 2 or n = 3 fits best with the measure data. The characteristics of random pitting corrosion were statistically analyzed and the mass loss of pipe due to pitting corrosion was also determined after buckling test, the analysis results indicate that both lognormal and generalized extreme value (GEV) distribution are adequate to depict the distribution of pitting depth and pitting diameter-to-depth ratio (DDR). The corrosion morphology was observed using scanning electron microscope (SEM), which indicates that the shape of pitting defect is cylindrical or semi-ellipsoid. Finally, the relationship between collapse pressure and geometry defects was analyzed based on the experiment results.