...
首页> 外文期刊>Thin Solid Films >Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment
【24h】

Corrosion properties of HVOF cermet coatings with bond coats in an aqueous chloride environment

机译:带氯化物的HVOF金属陶瓷涂层的腐蚀性能

获取原文
获取原文并翻译 | 示例
           

摘要

WC-17Co coatings with Ni-5Al bonding layers were deposited on Al-7075 by HVOF spraying. The top-coat consisted of layers comprising tungsten carbide particles embedded in a Co(W,C) matrix of varied composition.The coated specimens were subjected to potentiodynamic polarization in 3.5% aqueous NaCl at 25, 35 and 45 ℃. The coatings exhibited pseudopassivity caused by the oxidation of tungsten, carbon and possibly cobalt. Chronoamperometric measurements indicated that the inhomogeneous binder composition induced active corrosion processes taking place simultaneously with pseudopassivity. Cyclic polarization suggested that the coatings were not susceptible to pit corrosion in the temperature range of 25-45 ℃. The likely "critical pitting" temperature of the coatings was 60 °C. Higher testing temperatures led to lower corrosion potentials and faster corrosion kinetics.
机译:通过HVOF喷涂将具有Ni-5Al粘结层的WC-17Co涂层沉积在Al-7075上。面漆由埋入不同成分的Co(W,C)基质中的碳化钨颗粒组成。涂层样品在3.5%NaCl水溶液中于25、35和45℃下进行电动力极化。涂层表现出由钨,碳和可能的钴的氧化引起的假钝化。计时安培测量表明,不均匀的粘合剂组合物引起的主动腐蚀过程与假钝化同时发生。循环极化表明,该涂层在25-45℃的温度范围内不易受坑腐蚀。涂层可能的“临界点蚀”温度为60°C。较高的测试温度导致较低的腐蚀电位和更快的腐蚀动力学。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号