首页> 外文期刊>Solar Energy >Analytical investigation of solar air heater with jet impingement using energy and exergy analysis
【24h】

Analytical investigation of solar air heater with jet impingement using energy and exergy analysis

机译:利用能量和火用分析法对带有射流冲击的太阳能空气加热器进行分析研究

获取原文
获取原文并翻译 | 示例
       

摘要

In this present work an exergy efficiency of the single pass double duct jet plate solar air heater (SPDDJPSAH) is analytically investigated. The analysis is carried out for different mass flow rate m = 0.002-0.023 kg/s, stream wise pitch ratio X/D-h = 0.435-1.739, span wise pitch ratio Y/D-h = 0.435-0.869 and jet diameter ratio D-j/D-h = 0.043-0.109. The overall performance of solar air heaters is effectively evaluated by the exergy analysis by considering both the useful energy gain and subsequent pumping power requirement. Results show that SPDDJPSAH has been enhancing the effective efficiency by 21.2% and exergy efficiency by 22.4% when compared with Single Pass Single Duct Jet Plate Solar Air Heater (SPSDJPSAH). The effects of mass flow rate and jet plate design parameters on the exergy efficiency have been presented. The optimized values of stream wise pitch ratio X/D-h = 1.739, span wise pitch ratio Y/D-h = 0.869 and jet diameter ratio D-j/D-h = 0.065 are identified at the mass flow rate of 0.0035 kg/s and yields the maximum exergy efficiency of 4.36%. Design plots are also prepared in order to identify the optimum values of jet plate design parameters to achieve the desired temperature rise. Using the analytical results, the correlations have been developed for predicting the exergy efficiency in terms of Reynolds number and jet plate design variables.
机译:在本工作中,对单程双管喷射板式太阳能空气加热器(SPDDJPSAH)的(火用)效率进行了分析研究。针对不同的质量流量m = 0.002-0.023 kg / s,流向螺距比X / Dh = 0.435-1.739,跨度螺距比Y / Dh = 0.435-0.869和射流直径比Dj / Dh =进行分析0.043-0.109。通过有效能分析并同时考虑有用的能量增益和随后的泵送功率要求,可以有效地评估太阳能空气加热器的整体性能。结果表明,与单程单管喷射板式太阳能空气加热器(SPSDJPSAH)相比,SPDDJPSAH的有效效率提高了21.2%,火用效率提高了22.4%。提出了质量流量和射流板设计参数对火用效率的影响。在质量流量为0.0035 kg / s的情况下,确定了流向螺距比X / Dh = 1.739,跨向螺距比Y / Dh = 0.869和射流直径比Dj / Dh = 0.065的最佳值,并获得了最大的火用效率为4.36%。还准备了设计图,以识别喷射板设计参数的最佳值,以实现所需的温升。利用分析结果,已开发出相关性,以根据雷诺数和射流板设计变量来预测火用效率。

著录项

  • 来源
    《Solar Energy》 |2018年第2期|25-37|共13页
  • 作者单位

    Janson Inst Technol, Dept Mech Engn, Coimbatore 641659, Tamil Nadu, India;

    Coimbatore Inst Engn & Technol, Dept Mech Engn, Coimbatore 641109, Tamil Nadu, India;

    Janson Inst Technol, Dept Mech Engn, Coimbatore 641659, Tamil Nadu, India;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Solar air heater; Jet impingement; Exergy; Heat transfer; Thermo-hydraulic performance;

    机译:太阳能热水器;射流撞击;火用;传热;热工性能;
  • 入库时间 2022-08-18 00:22:47

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号