首页> 外文期刊>Semiconductor science and technology >Hydrodynamic and drift-diffusion modelling of charge carrier transport in ZnS:Mn thin-film electroluminescent structures
【24h】

Hydrodynamic and drift-diffusion modelling of charge carrier transport in ZnS:Mn thin-film electroluminescent structures

机译:ZnS:Mn薄膜电致发光结构中载流子输运的流体动力学和漂移扩散模型

获取原文
获取原文并翻译 | 示例
       

摘要

A set of model equations in the framework of the hydrodynamic approach is set up to describe the longitudinal charge carrier transport in ac-driven ZnS:Mn thin-film electroluminescent structures. Band-to-band impact ionization and a single type of hole recombination centres are taken into account to model charge carrier generation and recombination in the ZnS:Mn layer. The influence of the electric-field dependence of the impact ionization coefficients is analysed by comparing different models for this coefficient which have been used in the literature. Extensive numerical simulations within the framework of the drift-diffusion approach are presented. The main focus is on the average current-voltage characteristic and its dependence on several parameters such as the frequency of the driving voltage or geometry parameters of the ZnS:Mn layer. By comparing the results with those obtained within a hydrodynamic model it is found that, although very high carrier temperatures are reached, the longitudinal transport behaviour is similar in both models. The reason for this is the dominance of the longitudinal drift currents compared to diffusion and temperature-induced currents. The results are in good agreement with experiments. In contrast to simplified transport models which have been used previously the model equations formulated in this paper can be applied to describe the behaviour in thin-film structures with spatially extended contact areas exhibiting lateral pattern formation in certain parameter ranges.
机译:在流体力学方法的框架内建立了一组模型方程,以描述交流驱动的ZnS:Mn薄膜电致发光结构中的纵向电荷载流子传输。考虑了带间碰撞电离和单一类型的空穴复合中心,以模拟ZnS:Mn层中电荷载流子的产生和复合。通过比较文献中使用的该系数的不同模型,分析了碰撞电离系数的电场依赖性的影响。提出了在漂移扩散方法框架内的大量数值模拟。主要关注的是平均电流-电压特性及其对几个参数的依赖性,例如驱动电压的频率或ZnS:Mn层的几何参数。通过将结果与在流体动力学模型中获得的结果进行比较,可以发现,尽管达到了很高的载体温度,但两个模型中的纵向传输行为都是相似的。其原因是纵向漂移电流相对于扩散电流和温度感应电流具有优势。结果与实验吻合良好。与先前使用的简化传输模型相比,本文中公式化的模型方程式可用于描述薄膜结构中的行为,这些结构在一定参数范围内具有横向扩展的接触区域,并表现出横向图案的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号