A test cassette for x-ray-exposure experiments at the National Ignition Facility

摘要

We present the design and operation of a test cassette for exposure of samples to radiation environments at the National Ignition Facility. The cassette provides options for square and round samples and exposure areas; the cassette provides for multiple levels of filtration on a single sample, which allows dynamic range in experiments. The samples had normal lines of sight to the x-ray source in order to have uniform x-ray illumination. The incident x-radiation onto the samples was determined by the choice of filter thicknesses and materials. The samples were held at precise locations, accurate to within a few hundred microns, in the target chamber in order to have a known fluence incident. In the cassette, the samples were held in place in such a way that a minimal “line contact” allows them to have the maximal mechanical response to the x-ray load. We present postshot images of the debris found on films used for filters, and pre- and postexposure specimens. © 2010 American Institute of Physics Article Outline INTRODUCTION REQUIREMENTS AND DESIGN CONSIDERATIONS Sample holders and sample contact Filter pairs and collimator design Sample alignment Cassette alignment OPERATION AND RESULTS Filter film debris analysis Sample exposures SUMMARY AND CONCLUSIONS