The idea is to: 1. Introduce a double stacking wings for wing storage parks. 2. Have support Pads (preferably universal) instead of Geometric Beams bolted to the bottom skin but preferably disposable (with male fitting instead of the present female fitted to the Beams). 3. To have both Yellow and Orange Bed media to have fitted female couplings (instead of the present male threaded fitting on the Orange bed) 4. To have double connectors (old for newew for old) manufactured as a customer protection for introduction media Typically, aircraft wings in storage waiting for assembly with a fuselage are stored as individual units to minimise the risk of any damage. However, this is an inefficient use of space. It would be ideal to store wings in a stacked configuration that reduces the space requirements whilst maintaining a low risk of damage.
展开▼