Preparation and characterization of dual curable adhesives containing epoxy and acrylate functionalities

摘要

Bisphenol A type methacrylate, glycidyl methacrylate, acrylic acid and a trifunctional monomer were cured using both ultraviolet (UV) and thermal methods. The UV and thermal curing behavior of these components was evaluated using photo-differential scanning calorimetry (Photo-DSC) and-Fourier Transform infrared spectroscopy (FT-IR) analyses, as well as gel fraction and pendulum hardness measurements. The reaction rate was fast, and an increasing amount of C=C double bond character was observed by FT-IR, demonstrating an effective reaction in the presence of both UV irradiation and heat. The gel fraction analysis also confirmed the formation of crosslinks in the structure after the curing process. The pendulum hardness test revealed the nature of the curing process at different UV doses after UV and thermal curing. The adhesion strength was also evaluated as a function of epoxy group concentration, demonstrating that adhesion increased with increasing epoxy group content. The thermal degradation characteristics were monitored by thermal gravimetric analysis (TCA). The bonding between the epoxy and carboxyl groups resulted in a delayed degradation of the cured adhesive.