Experimental study on the lift generated by a flapping rotary wing applied in a micro air vehicle

摘要

An experimental study was conducted to further validate whether the newly proposed flapping rotary wing is suitable for micro air vehicle design. First, the effects of two main kinematical parameters (flapping frequency and initial angle of attack) of flapping rotary wing on lift generation were discussed. It was found that a higher lift can be generated by flapping rotary wing through increasing flapping frequency at a proper initial angle of attack. Second, effect of coupled flapping motion with rotating motion on lift generation was analyzed. It is important that a larger lift was generated by flapping rotary wing than the superposition lifts from purely flapping and purely rotating motions when the initial angle of attack was less than a critical value. Finally, the comparison of the capability of lift generation from the flapping rotary wing and conventional rotary wing was given. It was indicated that the lift from flapping rotary wing was larger than that from conventional rotary wing in the range of Reynolds number from 2600 to 5000 as long as Strouhal number was determined appropriately. The present work suggests that flapping rotary wing may be a feasible and promising wing layout used in the design of micro air vehicle in terms of lift generation.