首页> 外文期刊>Optical fiber technology >Groove micro-structure optical fiber refractive index sensor with nanoscale gold film based on surface plasmon resonance
【24h】

Groove micro-structure optical fiber refractive index sensor with nanoscale gold film based on surface plasmon resonance

机译:基于表面等离子体激元共振的纳米级金膜沟槽微结构光纤折射率传感器

获取原文
获取原文并翻译 | 示例
       

摘要

A groove micro-structure optical fiber refractive index sensor with nanoscale gold film based on surface plasmon resonance (SPR) is proposed and analyzed by the finite element method (FEM). Numerical results show that the average sensitivity is 15,933 nm/refractive index unit (RIU) with the refractive index of analyte ranging from 1.40 to 1.43 and the maximum sensitivity is 28,600 nm/RIU and the resolution of the sensor is 3.50 x 10(-8) RIU. The groove micro-structure optical fiber refractive index sensor do some changes on the D-shaped fiber sensor, compared with conventional D-shaped fiber sensor, it has a higher sensitivity and it is easier to produce than the traditional SPR sensor.
机译:提出了一种基于表面等离子体共振(SPR)的纳米级金膜沟槽微结构光纤折射率传感器,并通过有限元方法进行了分析。数值结果表明,平均灵敏度为15,933 nm /折射率单位(RIU),分析物的折射率为1.40至1.43,最大灵敏度为28,600 nm / RIU,传感器的分辨率为3.50 x 10(-8) )RIU。沟槽式微结构光纤折射率传感器在D形光纤传感器上做了一些改变,与传统的D形光纤传感器相比,它具有更高的灵敏度,并且比传统的SPR传感器更容易生产。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号