Experimental study on wave transmission coefficient, mooring lines and module connector forces with different designs of floating breakwaters

摘要

This paper presents the results and conclusions obtained from the physical model tests carried out with four different designs of floating breakwaters. Changes from a basic design have been introduced in order to evaluate the improvement in the efficiency as a coastal protection structure. Incident and transmitted waves have been measured, as well as the efforts in the mooring lines and module connectors. It has been found that the width of the pontoons is one of the key design parameters, while small modifications in the floating breakwater's cross section shape are less determinant in its hydrodynamic behaviour and in mechanical loads in the discussed ranges. 2D and 3D tests were conducted, observing the great influence that the wave obliquity has in the module connector forces.