首页> 外文期刊>Nuclear Technology >NEUTRONICS OF MINOR-ACTINIDE BURNING ACCELERATOR-DRIVEN SYSTEMS WITH CERAMIC FUEL
【24h】

NEUTRONICS OF MINOR-ACTINIDE BURNING ACCELERATOR-DRIVEN SYSTEMS WITH CERAMIC FUEL

机译:陶瓷燃料的微量ACT系元素燃烧加速器驱动系统的中子学

获取原文
获取原文并翻译 | 示例
           

摘要

We have investigated neutronic properties of lead-bismuth—cooled accelerator-driven systems with different minor-actinide-based ceramic fuels (two composite oxides and one solid-solution nitride). Adopting a trans-uranic composition with 40% plutonium in the initial load, transmutation rates of higher actinides (americium and curium) equal to 265 to 285 kg/GW(thermal) • yr are obtained. The smallest reactivity swing is provided by the magnesium oxide-based cercer fuel. The cercer cores, however, exhibit large coolant void worths, which is of concern in the case of gas bubble introduction into the core. Nitride and cermet cores are more stable with respect to void formation. The poorer neutron economy of the molybdenum-based cermet makes it difficult, however, to accommodate an inert matrix volume fraction exceeding 50%, a lower limit for fabricability. Higher plutonium fraction is thus required for the cermet, which would lead to lower actinide burning rates. The nitride core yields high actinide burning rates, low void worths, and acceptable reactivity losses.
机译:我们研究了铅铋冷却的加速器驱动系统的中子学性质,该系统具有不同的次act系元素基陶瓷燃料(两种复合氧化物和一种固溶氮化物)。采用初始负载时40含量为40%的反铀混合物,可以获得较高的act系元素(a和cur)的rates变速率为265至285 kg / GW(热)•年。最小的反应性摆动是由氧化镁基陶瓷燃料提供的。但是,cercer芯显示出较大的冷却液空隙值,这在将气泡引入芯中时值得关注。氮化物和金属陶瓷芯在空隙形成方面更稳定。钼基金属陶瓷的中子经济性较差,因此难以容纳超过50%(可加工性的下限)的惰性基质体积分数。因此,金属陶瓷需要较高的p含量,这将导致较低的act系元素燃烧速率。氮化物核产生高的act系元素燃烧速率,低空隙值和可接受的反应性损失。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号