【24h】

Development of a l-m plasma source for heavy ion beam charge neutralization

机译:开发用于重离子束电荷中和的l-m等离子体源

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Highly ionized plasmas are being employed as a medium for charge neutralizing heavy ion beams in order to focus to a small spot size. Calculations suggest that plasma at a density of 1-100 times the ion beam density and at a length ~0.1-1 m would be suitable for achieving a high level of charge neutralization. A radio frequency (RF) source was constructed at the Princeton Plasma Physics Laboratory (PPPL) in support of the joint Neutralized Transport Experiment (NTX) at the Lawrence Berkeley National Laboratory (LBNL) to study ion beam neutralization. Pulsing the source enabled operation at pressures ~10~(-6)Torr with plasma densities of 10~(11) cm~(-3). Near 100% ionization was achieved. The plasma was 10cm in length, but future experiments require a source 1 m long. The RF source does not easily scale to the length. Consequently, large-volume plasma sources based upon ferroelectric ceramics are being considered. These sources have the advantage of being able to increase the length of the plasma and operate at low neutral pressures. The source will utilize the ferroelectric ceramic BaTiO_3 to form metal plasma. A 1 m long section of the drift tube inner surface of NTX will be covered with ceramic. A high voltage (~1-5 kV) is applied between the drift tube and the front surface of the ceramic by placing a wire grid on the front surface. Plasma densities of 10~(12) cm~(-3) and neutral pressures ~10~(-6) Torr are expected. A test stand to produce 20cm long plasma is being constructed and will be tested before a 1 m long source is developed.
机译:高度电离的等离子体被用作中和重离子束的电荷的介质,以便聚焦到较小的光斑尺寸。计算表明,密度为离子束密度的1-100倍且长度约为0.1-1 m的等离子体将适合于实现高水平的电荷中和。普林斯顿等离子体物理实验室(PPPL)建造了一个射频(RF)源,以支持劳伦斯伯克利国家实验室(LBNL)的联合中和输运实验(NTX)来研究离子束的中和作用。在〜10〜(-6)Torr的压力下以等离子密度为10〜(11)cm〜(-3)进行脉冲源操作。实现了近100%的电离。等离子体的长度为10cm,但未来的实验需要1 m长的源。 RF源不容易按比例缩放。因此,正在考虑基于铁电陶瓷的大体积等离子体源。这些源的优点是能够增加等离子体的长度并在低中性压力下运行。该源将利用铁电陶瓷BaTiO_3形成金属等离子体。 NTX漂移管内表面的1 m长部分将被陶瓷覆盖。通过在格栅的前表面上放置线栅,在漂移管和陶瓷的前表面之间施加高电压(约1-5 kV)。预期血浆密度为10〜(12)cm〜(-3),中性压力约为10〜(-6)Torr。正在建造一个可产生20cm长等离子体的试验台,并将在开发1m长源之前对其进行测试。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号