2D simulations of transport dynamics during tokamak fuelling by supersonic molecular beam injection

摘要

Time-dependent transport of both plasma and neutrals is simulated during supersonic molecular beam injection (SMBI) yielding the evolution of edge plasma and neutral profiles. The SMBI model is included as a module, called trans-neut, within the original BOUT++ boundary plasma turbulence code. Results of calculations are reported for the realistic divertor geometry of the HL-2A tokamak. The model can also be used to study the effect of gas puffing. A seven-field fluid model couples plasma density, heat, and momentum transport equations together with neutral density and momentum transport equations for both molecules and atoms. Collisional interactions between molecules, atoms, and plasma include dissociation, ionization, recombination and charge-exchange effects. Sheath boundary conditions and particle recycling are applied at both the wall and the divertor plates. A localized boundary condition of constant molecular flux (product of density times speed) is applied at the outermost flux surface to model the SMBI. Steady state profiles with and without particle recycling are achieved before SMBI. During SMBI, the simulation shows that neutrals can penetrate several centimetres inside the last closed (magnetic) flux surface (LCFS). Along the SMBI path, plasma density increases while plasma temperature decreases. The molecule penetration depth depends on both the SMBI flux and the initial plasma density and temperature along its path. As the local plasma density increases substantially, molecule and atom penetration depths decrease due to their higher dissociation and ionization rates if the electron temperature does not drop too low. Dynamic poloidal spreading of the enhanced plasma density region is observed due to rapid ion flow along the magnetic field (parallel) driven by a parallel pressure asymmetry during SMBI. Profile relaxation in the radial and poloidal directions is simulated after SMBI termination, showing that the plasma returns to pre-SMBI conditions on a time scale of 60 ms.