首页> 外文期刊>Nuclear Engineering and Design >An analytical comparative exercise on the OECD-SETH PKL E2.2 experiment
【24h】

An analytical comparative exercise on the OECD-SETH PKL E2.2 experiment

机译:经合组织SETH PKL E2.2实验的分析比较练习

获取原文
获取原文并翻译 | 示例
       

摘要

The "First Workshop on Analytical Activities related to the SETH-OECD project" was held in Barcelona at the UPC's Institute of Energy Technologies (INTE), from 2nd to 3rd September 2003. The workshop gave the participants an opportunity to present the main results of the calculations performed as pre- and post-test simulations of SETH experiments. Among all the post-tests that were both presented and discussed, PKL experiment E2.2 holds special interest as it has been widely studied. Test E2.2 examined the most conservative case in terms of the maximum size that condensate slugs can reach and how far boron concentration can drop on resumption of natural circulation following a cold-side SB-LOCA. The analyses were performed by different working groups belonging to different countries and different codes were used. This paper goes deeper into the comparison of results of the different authors. Its aim is to both show and compare the results obtained by different working groups in their simulation of the experiment and to analyse the main parameters involved in order to draw conclusions on improvements that can be made in the analytical approach to such tests. All the participants managed to successfully predict the overall thermal-hydraulic system behaviour. Vessel fill-up together with slug build-up by reflux-condensation are phenomena that were correctly predicted, while simulation of natural circulation restart and transport of low-borated water slugs still need some improvement.
机译:2003年9月2日至3日在巴塞罗那的UPC能源技术学院(INTE)举办了“与SETH-OECD项目有关的分析活动首次研讨会”。该研讨会使与会人员有机会介绍了SETH-OECD项目的分析活动。计算作为SETH实验的测试前和测试后仿真进行。在介绍和讨论的所有后期测试中,由于已经进行了广泛的研究,因此PKL实验E2.2引起了特别的兴趣。测试E2.2在最冷的情况下检查了冷凝块的最大尺寸,以及在冷侧SB-LOCA恢复自然循环后硼浓度下降了多少。分析由属于不同国家的不同工作组执行,并使用了不同的代码。本文更深入地比较了不同作者的结果。其目的是展示和比较不同工作组在模拟实验中获得的结果,并分析涉及的主要参数,以便就可以对此类测试的分析方法进行改进得出结论。所有参与者都成功地预测了整个热工液压系统的行为。可以正确地预测容器的装满以及通过回流冷凝而形成的团块,而自然循环重启和低口水团块的运输模拟仍然需要一些改进。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号