Detective quantum efficiency of a phosphor-coupled photodiode array detector for use in digital X-ray tomosynthesis systems

摘要

The X-ray imaging performance of a phosphor-coupled photodiode array detector was assessed for use in a cone-beam computed tomography (CBCT) system for printed-circuit board inspection. The radiographic image quality of a detector is mainly responsible for the tomographic image quality. The radiographic image quality can be improved by increasing the X-ray exposure level, but CT scans at higher exposure can impose an enormous heat load on the X-ray tube. In this study, the detective quantum efficiency (DQE) was used to describe the image quality per air kerma as a metric to assess the detector performance. Measurement results were obtained for 40-kVp and 50-kVp tungsten-target X-ray beams, which show that the DQE of the detector is tolerant of air kerma levels as low as 0.8 μGy. Below this level, the electronic noise of the detector system could degrade the DQE performance. The concept of DQE and the measurement procedure are described, including the modulation-transfer function and the noise-power spectrum.