首页> 外文期刊>AAPS PharmSciTech >Effect of Thiolated Polymers to Textural and Mucoadhesive Properties of Vaginal Gel Formulations Prepared with Polycarbophil and Chitosan
【24h】

Effect of Thiolated Polymers to Textural and Mucoadhesive Properties of Vaginal Gel Formulations Prepared with Polycarbophil and Chitosan

机译:硫代聚合物对聚卡波非和壳聚糖制备的阴道凝胶制剂的质地和粘膜黏附特性的影响

获取原文
获取原文并翻译 | 示例
       

摘要

The aim of this study was to design and evaluate of mucoadhesive gel formulations for the vaginal application of clomiphene citrate (CLM) for local treatment of human papilloma virus (HPV) infections. Chitosan (CHI) and polycarbophil (PC) were covalently modified using the thioglycolic acid and L-cysteine, respectively. The formation of thiol conjugates of chitosan (CHI-TG) and polycarbophil (PC-CYS) were confirmed by FT-IR analysis and PC-CYS and CHI-TG were found to have 148.42 ± 4.16 and 41.17 ± 2.34 μmol of thiol groups per gram of polymer, respectively. One percent CLM gels were prepared by combination of various concentrations of PC and CHI with thiolated conjugates of these polymers. Hardness, compressibility, elasticity, adhesiveness and cohesiveness of the gels were measured by Texture profile analysis and the vaginal mucoadhesion was investigated by mucoadhesion test. The increasing in the amount of the thiol conjugates was found to enhance the elasticity, cohesiveness, adhesiveness and mucoadhesion of the gel formulations but not their hardness and compressibility when compared to gels prepared using their respective parent formulations. Slower release rate of CLM from gels was achieved when the polymer concentrations were increased in the gel formulations. PC and its thiol conjugate were found to prolong the release of CLM longer than 70 h unlike gel formulations prepared using CHI and its thiol conjugate which were able to release CLM up to 12 h. Stability of CLM was preserved during the 3 month stability analysis under controlled room temperature and accelerated conditions.
机译:这项研究的目的是设计和评估用于阴道应用柠檬酸克罗米酚(CLM)局部治疗人乳头瘤病毒(HPV)感染的粘膜粘附凝胶制剂。分别使用巯基乙酸和L-半胱氨酸对壳聚糖(CHI)和聚卡波非(PC)进行了共价修饰。通过FT-IR分析确认了壳聚糖(CHI-TG)和聚卡波非(PC-CYS)的巯基共轭物的形成,发现PC-CYS和CHI-TG的巯基基团分别为148.42±4.16和41.17±2.34μmol克聚合物。通过将各种浓度的PC和CHI与这些聚合物的硫醇化结合物组合,可以制备1%的CLM凝胶。凝胶的硬度,可压缩性,弹性,粘附性和内聚性通过质地分布分析进行测量,并且阴道粘膜粘附性通过粘膜粘附试验进行研究。当与使用它们各自的母体制剂制备的凝胶相比时,发现硫醇缀合物的量的增加增强了凝胶制剂的弹性,内聚性,粘附性和粘膜粘附性,但是没有增加它们的硬度和可压缩性。当凝胶制剂中的聚合物浓度增加时,CLM从凝胶中的释放速率会降低。发现PC及其硫醇结合物可将CLM的释放延长超过70小时,这与使用CHI及其硫醇结合物制备的凝胶制剂能够释放CLM长达12小时不同。在受控的室温和加速条件下进行的3个月稳定性分析中,保留了CLM的稳定性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号