...
首页> 外文期刊>Microwaves, Antennas & Propagation, IET >Broadband and high gain dielectric-rod end-fire antenna fed by a tapered ridge waveguide for K/Ka bands applications
【24h】

Broadband and high gain dielectric-rod end-fire antenna fed by a tapered ridge waveguide for K/Ka bands applications

机译:宽带和高增益介质杆端火天线由锥形脊波导供给K / KA频段应用

获取原文
获取原文并翻译 | 示例
           

摘要

In this study, a broadband and high gain dielectric-rod end-fire antenna are proposed for applications on both the K and Ka bands. By employing the double-ridged waveguide (DRW) feeding structure which is composed of a coaxial line to tapered DRW transition, a parabolic tapered DRW, and a parabolic-tapered flared parallel waveguide section, the impedance bandwidth of this proposed antenna is broadened to 84.5%. The dielectric-rod with the double circular truncated cone structure acted as the main radiator of the proposed antenna is adopted to achieve higher gains and lower side-lobe levels as compared to the traditional circular cone dielectric-rod, while the four-wedges structure inserted in the waveguide is developed as the matching section of the dielectric-rod to further improve the impedance matching. The measured results show that this antenna can be operated in 17.9-44.1 GHz, and the measured gain changes from 9.9 to 15.5 dBi. Moreover, the radiation patterns are demonstrated with observed end-fire characteristic in the overall operating band.
机译:在该研究中,提出了宽带和高增益介质杆端火天线,用于在K和Ka带上的应用。通过采用由同轴线与锥形DRW过渡组成的双脊波导(DRW)进料结构,抛物线锥形DRW和抛物线锥形的喇叭形波导部分,该所提出的天线的阻抗带宽宽到84.5 %。采用具有双圆形截头锥形结构的介电杆作为所提出的天线的主散热器,与传统的圆锥介质杆相比,实现更高的增益和较低的侧瓣水平,而插入的四个楔形结构在波导中被开发为介电棒的匹配部分,以进一步改善阻抗匹配。测量结果表明,该天线可以在17.9-44.1GHz中运行,测量的增益从9.9到15.5 dBI变化。此外,通过在整个操作带中观察到的端火特征来证明辐射图。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号