首页> 外文期刊>Microwave Journal >12 kW Solid-state Pulse Amplifier
【24h】

12 kW Solid-state Pulse Amplifier

机译:12 kW固态脉冲放大器

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The Advantech Wireless model APRA-L12000A is for a 12 kW L-Band solid-state pulse amplifier operating in the band of 1.2 to 1.4 GHz. Intended for radar applications, this unit provides the peak power with a duty cycle of up to 12 percent. The unit consists of 8 X 1.8 kW modular amplifiers that are phase combined using a special high power, low loss combiner. The product was created in response to an overwhelming demand in the marketplace for robust, solid- state pulse amplifiers that can be vehicle-mounted. It can be used in military and civilian radar systems. Due to the modular architecture, a failed RF module may be safely removed and replaced without service interruption (hot-swapped). A single module failure will cause a drop of only 1.16 dB in output power. The Interface Panel containing a redundant input/driver module provides the Monitor and Control Interface for the entire system. The power supply system is also modular, operating on a load-sharing configuration with hot-swappable capability.
机译:研华无线型号APRA-L12000A适用于工作在1.2至1.4 GHz频段的12 kW L波段固态脉冲放大器。该单元旨在用于雷达应用,可提供高达12%的占空比的峰值功率。该单元由8 X 1.8 kW模块化放大器组成,可使用特殊的高功率,低损耗组合器进行相位组合。该产品是为满足市场对可车载的耐用型固态脉冲放大器的巨大需求而创建的。它可以用于军事和民用雷达系统。由于采用了模块化架构,因此可以安全地卸下和更换发生故障的RF模块,而不会造成服务中断(热插拔)。单个模块故障将导致输出功率仅下降1.16 dB。包含冗余输入/驱动程序模块的接口面板为整个系统提供了监视和控制接口。电源系统也是模块化的,以具有热插拔功能的负载共享配置运行。

著录项

  • 来源
    《Microwave Journal》 |2011年第10期|p.169|共1页
  • 作者

  • 作者单位
  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号